Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2008
    Location
    Castries
    Posts
    221
    Rep Power
    34

    Ir2270 error E000584-8001

    Hello i have a an Ir2270 with an error e000584-8001. The sorter sim to be the issue, does anyone have this problem and what fix can be carried out.

    Thanks

  2. #2
    Field Supervisor 500+ Posts
    Ir2270 error E000584-8001

    Simons's Avatar
    Join Date
    Jun 2008
    Location
    Midwest USA
    Posts
    493
    Rep Power
    0

    Re: Ir2270 error E000584-8001

    make sure your board is version 10 or higher. That will help the finisher a lot.


    n E540-8001 indicates that the
    stack tray has been driven, but the paper surface is not detected. In
    this case, it has been found that the Lever (4A3-1104-000) is Damaged. The lever was replaced, to resolve the issue.

    also

    Check your controller for a blown fuse ...FU3

    FU3 supply's 24 volts DC to M1, the stack tray shift motor. When this fuse blows it will give an E540-8001
    code and the tray will not move at all. The Finisher service manual
    shows M6 as the stack tray shift motor but it is actually M1.


    Also at the bottom of the tray travel there is a sensor. That flag was upgraded to help keep light out. Maybe related or not. But the big one is the motor. Also take off the back cover of the finisher and check the cable harness. make sure it has not rubbed a hole in the wires.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here