Canon IR3245 Processing data

[northernlife]

bad main con, nic or ram. Follow the path in the SM that the image data takes and change the parts in sequential order. NIC to main con, main con to ram and then back to main con for rasterization, From there it sends the signals to the dcon but you aren't even getting there. Does it ever do it when doing copies or just prints?

[aco.bk]

Bad ram definitely

[northernlife]

Just an FYI that the canon's use standard memory, you can remove the dimm, throw it in a pc and run a memtest86 on it. if you see red, it's bad

[danno]

• downgrade software to version 42

[Canuck]

I have had flakey ports on hubs,switches and routers cause issues like this....bad cables,etc. Pull the RAM out and clean the contact areas with fine sandpaper and alcohol. Make sure SNMP is turned off on each driver.

[luis1984bol]

Hello my friends:

I just got the same problems with CANON iR3245. Have you found any solutions for this issue?. Best regards!!!

[Borsody75]

Hello Lui from Bolivia,

Upgrade the software to 48.02

It is brand new, and Canon promise it can solve your problem.

[luis1984bol]

Hello Lui from Bolivia,

Upgrade the software to 48.02

It is brand new, and Canon promise it can solve your problem.

Thank you my friend. Is there any way to download that version of firmware from Internet?

Best greetings.

[Borsody75]

Sorry, you should ask your Local Canon dealer

[luis1984bol]

DSC_0424.jpgDSC_0425.jpgDSC_0460.jpg

Hello my friends:

Could anyone help me please with those errors?..

The problems is that the machine (iR3235) does not print (keeps "Processing....."). We need to restart the machine to print.

We try PLC5e, PCL6 and UFRII drivers.

Just got 48.02 firmware, let you know if it works.