E00075

[luis1984bol]

Hi all ...has anyone seen a solid fix fix for e0075 on image runner advance 50xx...i have fitted mod kit and new belt blade ..update firmware on some machines works fine on others they last a week or so then come back out...i have tried leveling machines from castors but still no joy..

I have had this problem before and I had adjusted this part E075 adjust small.jpg

This is located on the left side of the machine. You have to remove the covers.

Try to do this adjustment.

[Phil B.]

I pulled the motor, can't figure which bracket you are referring to - I am assuming it's not the one on top of the assembly that is part of the frame connecting the cleaning assembly. Does it actually have adjustment markings and I'm just missing it? ......

this thread is over 3 years old...start a new thread of your own

[dan7777]

I pulled the motor, can't figure which bracket you are referring to - I am assuming it's not the one on top of the assembly that is part of the frame connecting the cleaning assembly. Does it actually have adjustment markings and I'm just missing it? ......

Behind the motor that drives the belt are two large screws with red paint (do not adjust color). Bracket up goes more negative. One is harder to see than the other but both the same size.