I have error mark E000747-8000
I have error mark E000747-8000
Probably an IRC model that needs some cards removing cleaning?
V
Hi is it when printing.
OK JMartin560. This is your first post. So here is a little advice.
# 1, give model #
# 2, What have you done already to HELP yourself.
# 3, And after asking question say, Thanks in advance.
I'm sure there are more but that will do for now.
PS, are you a copier, printer tech. ?
If not then forget about your problem.
Just call a repairman.
Thanks
An error occurs in the communication with the open interface PCB. Disconnect and Reconnect or replace it. Replace Main Controller (Main)
This was out of the IRC2880 manual.
Bookmarks