Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    canon IR5000 , cleaning web gear burn always

    hi every bodyi have IR5000 problem with cleanning web gear is burn and damage from heater temperaturei change it several time ( by original one ) and always burn and damagei change thermistor and subthermistor and not solve the problemi change a prameter " fix-temp" from 0 to 2 also not helpplease help thanks

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: canon IR5000 , cleaning web gear burn always

    Quote Originally Posted by adel_nathan View Post
    hi every bodyi have IR5000 problem with cleanning web gear is burn and damage from heater temperaturei change it several time ( by original one ) and always burn and damagei change thermistor and subthermistor and not solve the problemi change a prameter " fix-temp" from 0 to 2 also not helpplease help thanks
    Maybe check Fixing Roller bushings for wear/breakage which may give an incorrect reading through Thermistors?

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: canon IR5000 , cleaning web gear burn always

    thanks , i check the pushing , it's ok
    any other idea

  4. #4
    Field Supervisor 500+ Posts Rachid.Akli's Avatar
    Join Date
    Oct 2011
    Location
    Algiers
    Posts
    597
    Rep Power
    34

    Re: canon IR5000 , cleaning web gear burn always

    Quote Originally Posted by adel_nathan View Post
    thanks , i check the pushing , it's ok
    any other idea

    Clean or replace the cooling filters.

    Rachid.
    "Find a job you love and you’ll never have to work a day in your life." Nagy's father

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: canon IR5000 , cleaning web gear burn always

    Mr Rachid , thanks
    but where is cooling filter
    please , tell me in details
    thanks

  6. #6
    Service Manager 10,000+ Posts
    canon IR5000 , cleaning web gear burn always

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: canon IR5000 , cleaning web gear burn always

    Quote Originally Posted by adel_nathan View Post
    Mr Rachid , thanks
    but where is cooling filter
    please , tell me in details
    thanks
    ----------------------------------

    Replace the black gear (FS7-0045-000) with 22t/63t/ FS7-0893-000.
    You should also replace the other web advance gears with the following: FS7-0091-000, FS7-0894-000 and FS7-0895-000. For best results replace all 4 gears as a set.


    FM1=Feed fan=Draws print paper to the feed belt.
    FM2=Primary charging assembly cooling fan=Cools the primary charging assembly
    and cleaner.
    FM3=Cooling>Heat discharge fan=Discharges exhaust of each fan to the outside of the machine.
    FM4=Controller cooling fan=Cools the laser unit, drive unit, and controller.
    FM5=De-curling fan=Removes curling of print paper after fixing.
    FM6=DC power supply fan=Cools the power supply PCB.
    FM7=Hard disk fan=Cools the hard disk.
    FM8=Duplexing feeding fan=Cools the duplexing feeding motor.

    fans.JPG
    FB2-7970-000 ===SHEET, MESH
    FB5-5570-000 ==FILTER, OZONE

    fm3.JPG
    Last edited by teckat; 10-26-2013 at 03:38 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: canon IR5000 , cleaning web gear burn always

    I believe that there is a tin foil heat shield in the upper fuser area that falls off...check for it..i think 5020 had it,,been a while. Also make sure the filters and grills are clean...primary filter clogs on one of these and the cleaner unit will back up ...chunks inside

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: canon IR5000 , cleaning web gear burn always

    i check the cooling fan ,and other suction fans , it's working normal
    there aren't any heat shiedl there ,

    i think to replace the plastic gear by a steel one
    what do u think ????

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here