Hello ...
I am new to the copiers world .. Recently i bought a canon iR2230 with network card interface and there is network settings in the setup menu .. So i could assign an ip address and netmask and gateway and i connected it to my PC with rj45 cable .. I was able to ping the printer address from the PC but i couldn't print or discover the copier and after some reading here on the forum i was able to access the service mode and i realized that my rom version was "8.33 C" and i checked that there ia no HDD and my Ram was 256 .. My question is how can i upgrade this copier to enable network printing and if anyone from the respectrd members can support me with the Printing Firmware and the instructions of the upgrading process i will be so grateful .
Thanks in advance
Bookmarks