Dear /Copy TechTeam,
First of all i want to thanks your team for previous help. i face a problem that the ir2530 do not make 'auto detect' when i
make a copy from copy board glass i wantv your help
thanks
akm
Dear /Copy TechTeam,
First of all i want to thanks your team for previous help. i face a problem that the ir2530 do not make 'auto detect' when i
make a copy from copy board glass i wantv your help
thanks
akm
------------------------------------------------
In service mode confirm SENS CNF is 1.
Service Mode>SCAN>SCAN READER>OPTION>BODY>SENS CNF = 1
Power cycle machine.
Then Confirm the following settings are set correctly in service mode.
SM>SCAN>SCAN Reader>Option>Body>SZDT-SW = 1
SM>SCAN>SCANReader>Option>Body>SENS-CNF = 1
U mean original size identification of document does not take place
REFERENCE for 2530/2525/2520 READER
Copy board glass is not detecting the correct paper size.
The copy board cover is closed at an angle of more than 5 deg but less than 30 deg,
The Original sensor Turns on and original size identification is performed.
To resolved the issue, re-seat connection on the Open / Closed sensors and Adjust the sensor Mount.
S32 Copy Board Cover Open/Closed, Ends original size identification with the copy board cover at 5 deg
S33 Copy Board Cover Open/Closed, Detects the copyboard cover open/close. Starts original size identification with the copy board cover
at 30 deg.
S21 Copy Board Cover Open/Closed, Ends original size identification with the copy board cover at 5 deg
S26 Copyboard Cover Open/Closed, Detects the copyboard cover open/close. Starts original size identification with the copy board cover at 30 deg.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks