Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 24
Re: How do I change IP address on c5185 with Fiery Controller?
yes looks like you need more kits for it to sync up with your copier. follow the above posts :/
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: How do I change IP address on c5185 with Fiery Controller?
Hi, thanks for your help everyone. I got it working by manually rebooting the server after entering setup mode. Just unplugged the server's power and plugged it back in and after 2 minutes it showed up.Thanks again for your help.
-
Technician
- Rep Power
- 24
Re: How do I change IP address on c5185 with Fiery Controller?
to reboot a fiery the safe way without unplugging it
1. Turn the copier off Leave the copier off for about 2-10 minutes
2. Fiery should see the copier is off and shutdown.
3. Turn copier on and fiery will automatically power on if the main power is in on position on fiery.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks