Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: E0051-0001

  1. #1
    romel85
    Guest

    Exclamation E0051-0001

    Good Day!
    Im having a serious trouble with my CANON ir c5870 always having a paper jam followed by and error code E0051-00001.
    I have clean all the sensor with air blower and some replace it with new one. by still code appear i have already clear the error.
    Plz someone help me
    Thank you...!

  2. #2
    romel85
    Guest

    Exclamation Re: E0051-0001

    Were i can find the horizontal registration home position.
    it say that the horizontal registration home position is not detected within a specific period of time.

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: E0051-0001

    A couple of Tech Cases - hope they help.

    In this case, a bent guide in the duplex path was blocking the actuation of the horizontal registration sensor (PS24); resulting in the error code. Once the actuation of the sensor was set back to normal the error code was resolved.


    Symptom
    The E051 is a side registration home position error. This error occurs while the M28 horizontal registration motor moves the horizontal registration plate to the home position. The horizontal registration home position sensor PS24 fails to detect the plate thus generating the E051 error code.


    Cause
    In this case, the Gear listed in Figure 272, Key Number 6, had a few teeth missing preventing the gear from being driven.

    Action
    Replace the gear with a new one (FS6-0557-000).

  4. #4
    Service Manager 10,000+ Posts
    E0051-0001

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: E0051-0001

    Quote Originally Posted by romel85 View Post
    Good Day!
    Im having a serious trouble with my CANON ir c5870 always having a paper jam followed by and error code E0051-00001.
    I have clean all the sensor with air blower and some replace it with new one. by still code appear i have already clear the error.
    Plz someone help me
    Thank you...!
    ------------------------------------------------------------
    Check for any jammed paper in Duplex Area





    1. Check PS24 (horizontal registration sensor) for correct position and any fallen paper.

    2. Check M28 (Horizontal Registration Motor) for operation.
    Service Mode > COPIER > FUNCTION > PART-CHK > MTR #28

    FK2-0163-000 M28
    FL2-2480-000 PS24






    Here is a pic of GEAR location posted by canonbundy

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician
    Join Date
    Mar 2019
    Location
    Karjat, Maharashtra, India
    Posts
    17
    Rep Power
    0

    Re: E0051-0001 in IR 7105

    sir I am tired of E 00051 because ... as I show problems with horizontal registration sensors, I tried the and change duplex unit on another machine ... however ... the duplex jam is showing and then after removing the duplex the machine gets warm and then the E00051- 0001 This error is coming ... As you mentioned I have also changed the MSW5 switch but the error does not go .... Please help me.

  6. #6
    Service Manager 10,000+ Posts
    E0051-0001

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: E0051-0001 in IR 7105

    Quote Originally Posted by ajaybhagat2889 View Post
    sir I am tired of E 00051 because ... as I show problems with horizontal registration sensors, I tried the and change duplex unit on another machine ... however ... the duplex jam is showing and then after removing the duplex the machine gets warm and then the E00051- 0001 This error is coming ... As you mentioned I have also changed the MSW5 switch but the error does not go .... Please help me.



    model ??
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician
    Join Date
    Mar 2019
    Location
    Karjat, Maharashtra, India
    Posts
    17
    Rep Power
    0

    Re: E0051-0001 in IR 7105

    Quote Originally Posted by teckat View Post



    model ??
    Ir 7105

  8. #8
    Technician
    Join Date
    Mar 2019
    Location
    Karjat, Maharashtra, India
    Posts
    17
    Rep Power
    0

    Re: E0051-0001 in IR 7105

    Quote Originally Posted by ajaybhagat2889 View Post
    Ir 7105
    Ir 7105 and E00051-0001 is proscribed again and again........... I have three ir 7105 machines. So for the first time I tried replacing the duplex, then I changed the MSW5 switch as you mentioned and then I first changed the DC board. But the problem is coming along .We just wanted to try to replace the previous connector which is a duplex to mashine connector...... what i do?

  9. #9
    Technician
    Join Date
    Mar 2019
    Location
    Karjat, Maharashtra, India
    Posts
    17
    Rep Power
    0

    Re: E0051-0001 in IR 7105

    Quote Originally Posted by teckat View Post



    model ??
    Canon IR 7105 this model and Erorr code E00051-0001

  10. #10
    Technician
    Join Date
    Mar 2019
    Location
    Karjat, Maharashtra, India
    Posts
    17
    Rep Power
    0

    Re: E0051-0001 in IR 7105

    Quote Originally Posted by ajaybhagat2889 View Post
    Ir 7105
    Sir please reply

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here