What is the procedure to calibrate the touch screen? Thanks in advance
What is the procedure to calibrate the touch screen? Thanks in advance
service mode > copier > function > panel
TOUCHCHK Adjusting the coordinate positions on the analog touchpanel
<Operating procedure>
- Align the press positions on the touchpanel and the coordinate positions on the
LCD section.
- If the LCD section has been replaced, execute this service mode.
1) Select TOUCHCHK to reverse itsdisplay. Then press the OK key.
2) Press sequentially the nine positive signs (+) that appear on the touchpanel in
order.
If they're too far out of alignment replace touch panel glass FK2-0329-000
Last edited by Brian8506; 12-04-2013 at 11:35 AM.
Densi has them. Their part # CATP0001
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
---------------------------------------------------------------------------------------------------------
It is working if you don't have any other IDEA:
Login User Setup mode (Star in head button)
system settings (need Admin login sometime)
3rd side of the menu
Initialize All Data/Settings
about 10-12 minutes and will be working again.
If is works any other technician please "like" :-) this
---------------------------------------------------------------------------------------------------------
Just another important thing:
DON'T use backup Data because the problem will be appear again.
HANDJOB. :-) the user optional data setup.
Thanks and (sorry 4 my bad English)
Replace touch screen! or check mattress touch screen
---------------------------------------------------------------------------------------------------------
You are welcome: mattinhbo1803
You will be back to replace it. Known problem from Canon...new ones have glue to prevent poor contact. I have changed about 20 in the last year or two. Clean,recalibrated,re-initialize,.....do as you wish. You WILL be back to replace it. FK2-0329 is the new improved one
Bookmarks