Canon IRA 6075i Fixing Cleaning Web Drive Solenoid

[Herrmann]

There are several soldered fuses on the dc board as also on the ps board, you should ohm them out, and if one is faulty, replace at first. Also you should have a closer look at the solder joints, because due to the ROHS rules the manufactor uses lead free solder. If in doubt, resolder them.

[IkeW0491]

There are several soldered fuses on the dc board as also on the ps board, you should ohm them out.

That was one of the first things that we checked Herrman!!!

All of the fuses ohm'd out as Good, no blown fuses!!

As for the solder joints its possible, but we have a new PS on order now, so I will just wait until it comes in.

IF it turns out to NOT be the PS, what else might I check?

THanks again

IKE

[vigour]

There is some info on this issue, about 12V being missing between J108 on the main driver pcb and J522 on the relay pcb