Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Aug 2013
    Location
    London
    Posts
    33
    Rep Power
    9

    CLOSE UPPER COVER at Canon Ipf 605 fault

    Hi all,

    I,ve got a problem with my CANON IPF 605 ploter

    When switch the printer ON, on the LCD is :

    CLOSE UPPER COVER , but the cover is closed, the printer looks like dead, do nothing, zero sound


    ipf 605 close upper cover.jpg


    Everyone know maybe how to fix it, which part have to be replaced ?


    Regards

    John


  2. #2
    Technician
    Join Date
    Aug 2013
    Location
    London
    Posts
    33
    Rep Power
    9

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    ipf605 1.jpgipf605 2.jpgipf605 3.jpgipf605 4.jpgipf605 5.jpg
    Quote Originally Posted by archiforma View Post
    Hi all,

    I,ve got a problem with my CANON IPF 605 ploter

    When switch the printer ON, on the LCD is :

    CLOSE UPPER COVER , but the cover is closed, the printer looks like dead, do nothing, zero sound


    ipf 605 close upper cover.jpg


    Everyone know maybe how to fix it, which part have to be replaced ?


    Regards

    John




    more picture with errors before it happend )


  3. #3
    Junior Member
    Join Date
    Jun 2016
    Location
    Sioux Falls
    Posts
    3
    Rep Power
    0

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    Quote Originally Posted by archiforma View Post
    ipf605 1.jpgipf605 2.jpgipf605 3.jpgipf605 4.jpgipf605 5.jpg





    more picture with errors before it happend )



    Was there ever a resolved fix for this? I am having a hard time trying to find a strait answer to this.


  4. #4
    Service Manager 1,000+ Posts
    CLOSE UPPER COVER at Canon Ipf 605 fault

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    I have had issues with power supplies and main controllers causing issues on the wide formats where you get a close cover message. Have you measured voltages and checked the switches for continuity? Most have an upper and lower switch on them.

    Accidents don't just happen. They must be carelessly planned.

  5. #5
    Junior Member
    Join Date
    Jun 2016
    Location
    Sioux Falls
    Posts
    3
    Rep Power
    0

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    Quote Originally Posted by charm5496 View Post
    I have had issues with power supplies and main controllers causing issues on the wide formats where you get a close cover message. Have you measured voltages and checked the switches for continuity? Most have an upper and lower switch on them.

    I did. The switches are testing ok. I think i saw something that said that if the firmware could be updated. Then the close upper cover would go away. I got into download mode and can't upload the firmware with the firmware tool. It says it needs to be in print mode. so that and i saw there was someone who had to replace the Main PCB.


  6. #6
    Service Manager 1,000+ Posts
    CLOSE UPPER COVER at Canon Ipf 605 fault

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    if you can I would make sure all of the DC voltages are being output to all areas. I was missing 24v on the IPF-710 that I had this on, so that is why I replaced power supply first

    Accidents don't just happen. They must be carelessly planned.

  7. #7
    Junior Member
    Join Date
    Jan 2017
    Location
    Atizapan de Zaragoza, Mex
    Posts
    1
    Rep Power
    0

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    Quote Originally Posted by archiforma View Post
    Hi all,

    I,ve got a problem with my CANON IPF 605 ploter

    When switch the printer ON, on the LCD is :

    CLOSE UPPER COVER , but the cover is closed, the printer looks like dead, do nothing, zero sound


    ipf 605 close upper cover.jpg


    Everyone know maybe how to fix it, which part have to be replaced ?


    Regards

    John
    Hi, John

    This same issue has come into the light to me. I had to dissassembly my plotter and I found out that when i turn it on in service mode that open cover issue shows up, but when i do it as a normal user it gives me this error
    E196-404E

    I've looked for it in the Service manual and though it is refered as a main PCB error, I think this issue seems to be a loop which may be caused by the photosensor located below the cover. As soon as I replace this, I'll let you know.

    Greetings,
    Ed

    Last edited by edsalmeron; 01-23-2017 at 02:33 AM. Reason: Wrong writting

  8. #8
    Junior Member
    Join Date
    Sep 2017
    Location
    Zamora
    Posts
    1
    Rep Power
    0

    Re: CLOSE UPPER COVER at Canon Ipf 605 fault

    Quote Originally Posted by edsalmeron View Post
    Hi, John

    This same issue has come into the light to me. I had to dissassembly my plotter and I found out that when i turn it on in service mode that open cover issue shows up, but when i do it as a normal user it gives me this error
    E196-404E

    I've looked for it in the Service manual and though it is refered as a main PCB error, I think this issue seems to be a loop which may be caused by the photosensor located below the cover. As soon as I replace this, I'll let you know.

    Greetings,
    Ed
    Hola a mi me pasa lo mismo. Conseguiste solucionarlo?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here