Hello everyone,
We received a Canon ImageRunner C3080 with a fiery attached as a trade in. Is it possible to remove the fiery and set up the system for standard print and scan?
Thanks in advance for all your help!!!
Mike
Hello everyone,
We received a Canon ImageRunner C3080 with a fiery attached as a trade in. Is it possible to remove the fiery and set up the system for standard print and scan?
Thanks in advance for all your help!!!
Mike
-------------------------------------------
UFRII printing is not available if the optional imagePASS J1 is used------
why would u want to remove the imagePass J1 Fiery
License options and RB-A board are necessary for all the printer options.
* PS Printer Kit-Q1 requires that PCL Printer Kit-Q1 and iR 512MB Expansion RAM-C1 be previously installed.
In order to use UFR II, PCL, PS, the memory capacity must be 1.5GB.
In order to use UFR II, PCL, and PS, RB-A board must be attached onto the main controller.
A Color PCL Printer Kit is available for purchase use, as a network printer.
Network Scan function enables you to use the machine as a conventional scanner.
You can scan a document using the machine, and read the data in an application you are using on your computer.
To use this function, the machine is required to be connected to a network, and the Color Network ScanGear software installed
Color Network ScanGear
http://software.canon-europe.com/software/0039663.asp
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks