Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Service Manager 10,000+ Posts
    Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Thumbs up Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Release of the Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    the release of the Macintosh OS X 10.9 (Mavericks) Driver for Fiery products. This driver also supports Macintosh OS X 10.6 (Snow Leopard), 10.7 (Lion) and 10.8 (Mountain Lion).

    The Macintosh OS X 10.9 installers are signed installers. These installers may run certificate validation over the network to check the Certificate Revocation Lists (CRL). Users may experience slowness in driver installation based on their network configuration.
    Supported Products:

    • imagePASS-A1 • imagePRESS Server A1100
    • imagePASS-H1 • imagePRESS Server A2100
    • imagePASS-B1 • imagePRESS Server A3100
    • imagePASS-U1 • imagePRESS Server A1200
    • imagePASS-A2 • imagePRESS Server A2200
    • imagePASS-B2 • imagePRESS Server A3200
    • ColorPASS GX200 • imagePRESS Server A1300
    • ColorPASS GX300 v1 • imagePRESS Server A2300
    • ColorPASS GX300 v2 • imagePRESS Server A3300
    • ColorPASS GX400 • imagePRESS Server K100
    • imagePRESS Server J100 • imagePRESS Server K200
    • imagePRESS Server T1 • imagePRESS Server Z1
    • imagePRESS Server Q2 • imagePRESS Server J200


    Supported OS:
    • Macintosh OS X 10.6, 10.7, 10.8, and 10.9

    INSTALLATION PROCEDURE:

    Note: If an older EFI Fiery printer driver is installed, use the Fiery Software Uninstaller included with this updated driver to remove it before installing the updated driver. The previous driver may cause printing conflicts if not properly removed. Driver

    1. Copy the compressed driver zip file to your desktop and uncompress the zip file containing the .dmg file.
    2. Double click the .dmg file to mount it.
    3. Open the mounted location, then the User Software folder and double click the Fiery Driver Installer
    and follow the on-screen instructions.
    4. Once completed add the printer as you normally would.
    LIMITATIONS:
    1. While adding a printer and selecting the "Internet Printing Protocol" (IPP printing), the "hold" queue is not available. Specify "print" or "direct" queue in the "Queue" field.
    2. If an older Macintosh OS v10.7.x is upgraded to Macintosh OS v10.9.x, it is required to remove the previous installation of the driver using the Fiery Software Uninstaller and reinstall the driver.
    3. While printing from an application, switching between different print queues consecutively during the same print session may cause this application to crash. This is an Apple OS specific issue and is reported to Apple for resolution.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #2
    tcomacadmin
    Guest

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    ​Is there a link or download for this? Thank you!

    Quote Originally Posted by teckat View Post
    Release of the Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    the release of the Macintosh OS X 10.9 (Mavericks) Driver for Fiery products. This driver also supports Macintosh OS X 10.6 (Snow Leopard), 10.7 (Lion) and 10.8 (Mountain Lion).

    The Macintosh OS X 10.9 installers are signed installers. These installers may run certificate validation over the network to check the Certificate Revocation Lists (CRL). Users may experience slowness in driver installation based on their network configuration.
    Supported Products:

    • imagePASS-A1 • imagePRESS Server A1100
    • imagePASS-H1 • imagePRESS Server A2100
    • imagePASS-B1 • imagePRESS Server A3100
    • imagePASS-U1 • imagePRESS Server A1200
    • imagePASS-A2 • imagePRESS Server A2200
    • imagePASS-B2 • imagePRESS Server A3200
    • ColorPASS GX200 • imagePRESS Server A1300
    • ColorPASS GX300 v1 • imagePRESS Server A2300
    • ColorPASS GX300 v2 • imagePRESS Server A3300
    • ColorPASS GX400 • imagePRESS Server K100
    • imagePRESS Server J100 • imagePRESS Server K200
    • imagePRESS Server T1 • imagePRESS Server Z1
    • imagePRESS Server Q2 • imagePRESS Server J200


    Supported OS:
    • Macintosh OS X 10.6, 10.7, 10.8, and 10.9

    INSTALLATION PROCEDURE:

    Note: If an older EFI Fiery printer driver is installed, use the Fiery Software Uninstaller included with this updated driver to remove it before installing the updated driver. The previous driver may cause printing conflicts if not properly removed. Driver

    1. Copy the compressed driver zip file to your desktop and uncompress the zip file containing the .dmg file.
    2. Double click the .dmg file to mount it.
    3. Open the mounted location, then the User Software folder and double click the Fiery Driver Installer
    and follow the on-screen instructions.
    4. Once completed add the printer as you normally would.
    LIMITATIONS:
    1. While adding a printer and selecting the "Internet Printing Protocol" (IPP printing), the "hold" queue is not available. Specify "print" or "direct" queue in the "Queue" field.
    2. If an older Macintosh OS v10.7.x is upgraded to Macintosh OS v10.9.x, it is required to remove the previous installation of the driver using the Fiery Software Uninstaller and reinstall the driver.
    3. While printing from an application, switching between different print queues consecutively during the same print session may cause this application to crash. This is an Apple OS specific issue and is reported to Apple for resolution.

  3. #3
    Service Manager 10,000+ Posts
    Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    they are scattered all over the place/ Canon USA/ Canon Euro/ also on Canon Support Sign in Site-
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    AronEA
    Guest

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Quote Originally Posted by teckat View Post
    they are scattered all over the place/ Canon USA/ Canon Euro/ also on Canon Support Sign in Site-
    When I access the imagePRESS Server Q2 V2 page on the Canon USA Support site, it states that there is no Software or Drivers available for Mac OS X 10.9. Can anyone advise a specific location to find these updated drivers? I can't even find the post/release statement quoted in this original post anywhere on the Canon site.

    Thanks so much!!

  5. #5
    Service Manager 10,000+ Posts
    Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Quote Originally Posted by AronEA View Post
    When I access the imagePRESS Server Q2 V2 page on the Canon USA Support site, it states that there is no Software or Drivers available for Mac OS X 10.9. Can anyone advise a specific location to find these updated drivers? I can't even find the post/release statement quoted in this original post anywhere on the Canon site.

    Thanks so much!!
    ==============================================

    Macintosh OS X 10.9 (Mavericks) Driver for the imagePRESS Server Q2 v2.0
    imagePRESS Server Q2 V2.0 PPD Installer with Plug-in for Macintosh OS X v10.9. It also supports Macintosh OS X v10.6, v10.7, and v10.8.
    see link below for
    iPS-Q2_v2.0_MacOSX_10.9_PS.zip

    http://www.fileswap.com/dl/5qIpDUeYc....9_PS.zip.html
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Technician
    Join Date
    Jun 2012
    Location
    ree
    Posts
    15
    Rep Power
    24

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    What about the driver for a Q1 Server?? Did they just not support this server anymore?? Does anyone have this server working with OS 10.6 or above??

  7. #7
    Service Manager 10,000+ Posts
    Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Quote Originally Posted by fernandometz@hotmail.com View Post
    What about the driver for a Q1 Server?? Did they just not support this server anymore?? Does anyone have this server working with OS 10.6 or above??
    ___;>{t
    Q1 server is 8 Years old\ easier to just update Q1 firmware to Q2 server


    January 8, 2009

    Product : imagePRESS Server Q1 / Q2

    Title : Upgrading from imagePRESS Server Q1 to imagePRESS Server Q2

    Question : Can an imagePRESS Server Q1 be upgraded to an imagePRESS Server Q2?

    Answer : By installing the imagePRESS Server Q2 system software, you can upgrade the imagePRESS Server Q1 Ver.1.1 to imagePRESS Server Q2 Ver.2.0. There is no hardware upgrade; the same hardware platform for imagePRESS Server Q1 can be used for the imagePRESS Server Q2 Ver.2.0.

    It is important to note, however, that a Q2 which has been upgraded from a Q1 will not support the use of Clear Toner with the imagePress C1.

    The software and printer differences are displayed as shown below in the Configuration Page

    imagePRESS Server Q1 Ver.1.x: EFI Fiery System 8 imagePRESS Server Q2 Ver.2.0: EFI Fiery System 8 Release 2

    imagePRESS Server Q1 Ver.1.x: Canon imagePRESS Server Q1 imagePRESS Server Q2 Ver.2.0: Canon imagePRESS Server Q2

    When the imagePRESS Server Q2 software is installed, each version of the controller shows "2.0".

    When the imagePRESS Q1v1.1 is upgraded, the connections of Command and Status Crossover Cable and Network Cable are the same as before the upgrade.

    When upgrading from imagePRESS Server Q1 to imagePRESS Server Q2, it is also required to upgrade the imagePRESS C1 to the latest firmware version available.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Technician
    Join Date
    Jun 2012
    Location
    ree
    Posts
    15
    Rep Power
    24

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Teckat, Thanks for your input... Had no idea a Q1 can be upgraded to a Q2.... Now how can I get my hands on the Q2 system software.....
    Having a c1 plus with Q2 server (but no cds) Do you think if I clone the hard drive and install on it on the Q1 would do the trick???

    What do you use to clone such disks? Do I have to do it on a Linux system? Or a windows image/cloning software will do the trick...

  9. #9
    Service Manager 10,000+ Posts
    Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Quote Originally Posted by fernandometz@hotmail.com View Post
    Teckat, Thanks for your input... Had no idea a Q1 can be upgraded to a Q2.... Now how can I get my hands on the Q2 system software.....
    Having a c1 plus with Q2 server (but no cds) Do you think if I clone the hard drive and install on it on the Q1 would do the trick???

    What do you use to clone such disks? Do I have to do it on a Linux system? Or a windows image/cloning software will do the trick...
    ______
    Never tried it/ would try windows image
    Just make sure C1 has at least v53 or newer firmware
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Dayd
    Guest

    Re: Macintosh OS X 10.9 (Mavericks) Driver for Fiery Products

    Quote Originally Posted by teckat View Post
    ==============================================

    Macintosh OS X 10.9 (Mavericks) Driver for the imagePRESS Server Q2 v2.0
    imagePRESS Server Q2 V2.0 PPD Installer with Plug-in for Macintosh OS X v10.9. It also supports Macintosh OS X v10.6, v10.7, and v10.8.
    see link below for
    iPS-Q2_v2.0_MacOSX_10.9_PS.zip

    FileSwap.com : iPS-Q2_v2.0_MacOSX_10.9_PS.zip download free
    Hi, thanks for Q2 v2 driver, but same problem with server T1 v2.0, can you help me?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here