Canon irc4080 fuzzy prints

[V-P]

print this one

pussy-cat.jpg

[Herrmann]

Sorry, Teckat, but i would suggest to print a much more conclusive Image like this one here:
Testform_2013_RZ_A3.pdf

This is also much useful for testing Fiery rip calibration

[mramlawi]

Dear Colleagues ,

sorry for being late , i was sick actually my problem is solved thanks for all of you ,i download the latest PS driver and it totally changed and looks great but the clc3200 still looks more nice it looks shiny than irc4080 ,i wonder !! why!! i always saw irc4080 with a shinny pic but i didnt understand you this losein some of shinny and all its parts are original all the Drums . i want to ask if i can increase the prints color density how ?


thanks any way

[mramlawi]

print this one

pussy-cat.jpg

i print it and it looks great but still see the black is not shinny :/

[teckat]

i print it and it looks great but still see the black is not shinny :/

so i installed most of the drivers and still same problem

1-you originally said u installed all the drivers in your first post/
you are very confusing when posting for issues to help/ sometimes it takes 5/6 responses to get the story straight ------------

2-the printers have a different fuser one uses rollers > other a pressure belt

Make sure Toner Saver Mode has been turned OFF. Make sure to print out a config page to verify.
Print out a PS Configuration Page to verify. Under the Print Quality section, make sure the Toner Save option is set to OFF. If it is set to ON, Press Additional Functions, Printer Settings, Settings, Print Quality and then Toner Save to OFF.

---

3-if your PG10 is solid/ u need to make adjustments in driver/

In order to enhance the PS printer driver output image quality, perform the following steps within the PS printer driver:

1. Go to Printer Preferences.
2. Go to Fiery Printing tab.
3. Select Image Quality drop-down.
4. Click Smoothing to OFF.
5. Click Density to Level 1 (Lightest) or Level 2 depending on your preferences.
6. Click Resolution to 1200dpi.
7. Click Halftone Screen to High Resolution.
8. Click OK.
9. For PDF files specifically using Adobe Acrobat, select 'File > Print' in the application, select 'Advanced' and check the checkbox for 'Print as Image' to select 600dpi.

[mramlawi]

1-you originally said u installed all the drivers in your first post/
you are very confusing when posting for issues to help/ sometimes it takes 5/6 responses to get the story straight ------------

2-the printers have a different fuser one uses rollers > other a pressure belt

Make sure Toner Saver Mode has been turned OFF. Make sure to print out a config page to verify.
Print out a PS Configuration Page to verify. Under the Print Quality section, make sure the Toner Save option is set to OFF. If it is set to ON, Press Additional Functions, Printer Settings, Settings, Print Quality and then Toner Save to OFF.

---

3-if your PG10 is solid/ u need to make adjustments in driver/





In order to enhance the PS printer driver output image quality, perform the following steps within the PS printer driver:

1. Go to Printer Preferences.
2. Go to Fiery Printing tab.
3. Select Image Quality drop-down.
4. Click Smoothing to OFF.
5. Click Density to Level 1 (Lightest) or Level 2 depending on your preferences.
6. Click Resolution to 1200dpi.
7. Click Halftone Screen to High Resolution.
8. Click OK.
9. For PDF files specifically using Adobe Acrobat, select 'File > Print' in the application, select 'Advanced' and check the checkbox for 'Print as Image' to select 600dpi.

Teckat , honestly i used the PS driver in the begining and it printed B/W ,but after your responses i tried another PS driver with the latest version and it totally changed the Photo ,the Test 10 is amazying

[teckat]

Welcome (;

Good fixing !!