canon scanner dr7090 error code p081

[4color]

Dear friends,
I have Canon scanner Dr-7090c during morning time probably for 2 to 3 hours paper get jammed and give error code p081.
but once it start smoothly, rest of the day it works fine.pls help ....i don't have manual or code list for this model so unable to trace further.
if some one help by sending the code list it will be a gr8 help.
activity done
we had replaced feed rollers.
cleaned all sensors. and paper path roller.
in tools mode we had sens-int done.

thanx in adv

[Rachid.Akli]

Dear friends,
I have Canon scanner Dr-7090c during morning time probably for 2 to 3 hours paper get jammed and give error code p081.
but once it start smoothly, rest of the day it works fine.pls help ....i don't have manual or code list for this model so unable to trace further.
if some one help by sending the code list it will be a gr8 help.
activity done
we had replaced feed rollers.
cleaned all sensors. and paper path roller.
in tools mode we had sens-int done.

thanx in adv

Hello,

Have you replaced the separation pad ?

If there is any feeding roller clutch, replace it.

DR7090C Error codes.jpg

Rachid

[4color]

Hello,

Have you replaced the separation pad ?

If there is any feeding roller clutch, replace it.

DR7090C Error codes.jpg

Rachid

Thankyou I think this list will help a lot. I'll try replacing the clutch as separation pad was already changed

regards
puneet

[djwhoo]

well... what worked?