After a short period of storage this machine - less than 60k copies - returns error code 002 right at the end of the warm up cycle. This seems to be fuser related - over temp???
But Ihave had the very clean fuser out and checked - all lamps are OK. Two thermistors seem OK and resistance drops as they are warmed in hand. Resistance at finger temp about 200k each. Is that what you would expect?
The thermistor in contact with roller had a small amount of crud - carefully cleaned off.
I tried to clear the code in service mode as it may be persistent.
Manual is specific about code 001 and 003, but not 002.
Anyone have any guidance for me please -reluctant to order a new fuser at a trade of over £300 when I see nothing at all wrong with the current very clean unit.
Maybe I am missing something obvious??
Thanks all
Alan
Bookmarks