Results 1 to 6 of 6
  1. #1
    Field Supervisor 500+ Posts
    Canon ir 1730f/fuser /question


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    611
    Rep Power
    41

    Canon ir 1730f/fuser /question

    HI,
    Customer has Ir 1730F with knocking noise from fuser.ONE GEAR looks very frayed(White gear that drives fuser).Is it easy enough to change fuser gears or am I
    better off replacing fuser unit,I couldn't find rollers separate from unit and service manual didn't have fuser disassemble in it.
    Any help kindly appreciated.
    THANKS ANDY

  2. #2
    Senior Tech 250+ Posts ernesto's Avatar
    Join Date
    Oct 2011
    Posts
    425
    Rep Power
    31
    is the noise like a train? .....toc..toc..toc

    if the answer is yes, you could adjust the screws that you can see in the picture.they are back the machine.

    http://www.youtube.com/watch?v=0QqmIq_NOE4&feature=youtube_gdata_player

    all the best
    Attached Images Attached Images

  3. #3
    Field Supervisor 500+ Posts
    Canon ir 1730f/fuser /question


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    611
    Rep Power
    41

    Re: Canon ir 1730f/fuser /question

    HI
    Thanks for help.GEAR ON fuser is stripped pretty bad.
    THANKS ANDY

  4. #4
    Senior Tech 100+ Posts IkeW0491's Avatar
    Join Date
    Oct 2013
    Location
    Hartsville
    Posts
    172
    Rep Power
    23

    Re: Canon ir 1730f/fuser /question

    Quote Originally Posted by cucuklotz View Post
    HI
    Thanks for help.GEAR ON fuser is stripped pretty bad.
    THANKS ANDY
    Hi Cucu,

    If the gear on the fuser is stripped that bad.

    It would be advisable to just replace the fuser, you don' t wanna have to get into disassembling and reassembling a fuser.

    Also I would check the screws that Ernesto told you to, just to make sure they are tight.

    IKE

  5. #5
    Field Supervisor 500+ Posts
    Canon ir 1730f/fuser /question


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    611
    Rep Power
    41

    Re: Canon ir 1730f/fuser /question

    THANK YOU.I ORDERED FUSER UNIT TODAY AND WILL LOOK AT POSITION OF Screws when I install.
    THANKS ANDY

  6. #6
    Field Supervisor 500+ Posts
    Canon ir 1730f/fuser /question


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    611
    Rep Power
    41

    Re: Canon ir 1730f/fuser /question

    THANKS,
    Fuser did the trick and I made sure screws were adjusted and aligned.
    ANDY

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here