IR 3300 giving Very light print. Is there is any option in service menu to increase the print dark.
IR 3300 giving Very light print. Is there is any option in service menu to increase the print dark.
you should clean the mirrows and if it is not enough try to do a density adjust in service mode
all the best
light PRINT, worn drum, bad trans roller, bad dev or dirty laser. Usually with the age of the 3300 the dev or laser will be the cause if it's not the drum
Take out the cd unit and clean the toner and refill the new toner
I'm calling dirty laser
Take out the d.p unit and clean the toner and refill the new toner...clean mirror
Bookmarks