irc3080 toner not load in to drum unit

[jaruwit]

irc3080 run out toner. it not load black toner in to drum unit.
I test motor M11 COPIER>FUNCTION>PART-CHK>MTR. It ok. I open front door and hack hardware door sensor to see motor. it turn.
I try service mode level 2 COPIER>FUNCTION>INSTALL>INIT-K. it not turn.
How to repair?

[northernlife]

Developer on these are driven by a clutch on the drum drive assembly. CL4 FM2-3581

[teckat]

[jaruwit]

I test motor CL4
COPIER>FUNCTION>PART-CHK>CL 4
COPIER>FUNCTION>PART-CHK>CL-ON
It say "OK!"
But I can't see component clutch working or not.
Is it say "OK!" mean it work OK? Or I must check hardware to make sure it work or not.

[vamoursly]

Do an autograd, is the black line missing? If so change the clutch.

V

[teckat]

I test motor CL4
COPIER>FUNCTION>PART-CHK>CL 4
COPIER>FUNCTION>PART-CHK>CL-ON
It say "OK!"
But I can't see component clutch working or not.
Is it say "OK!" mean it work OK? Or I must check hardware to make sure it work or not.

-----------

that is just a signal check/ does not mean hardware is functioning