Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    IR 5570 error code 840

    hi every body
    i have canon IR5570 , after i change the upper heater roller , the copier get e 840
    i try to reinstall the shutter several time , but same problem
    i asked who can i adjust the shutter in his place , is there home postion???
    thanks for help

  2. #2
    Service Manager 5,000+ Posts
    IR 5570 error code 840

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: IR 5570 error code 840

    Do you have the service manual for this machine? if you follow this instructions in that you will put the shutter back correctly.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: IR 5570 error code 840

    thanks Mr. copier tech , i allready read the manuel but there are some thing wrong i do , make a problem
    thanks for help

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: IR 5570 error code 840

    Quote Originally Posted by adel_nathan View Post
    hi every body
    i have canon IR5570 , after i change the upper heater roller , the copier get e 840
    i try to reinstall the shutter several time , but same problem
    i asked who can i adjust the shutter in his place , is there home postion???
    thanks for help
    Check the Shutter Sensor & Bracket are mounted properly - maybe swap with Web Sensor - check Shutter rotates freely when turned with your finger.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: IR 5570 error code 840

    Quote Originally Posted by canonbundy View Post
    Check the Shutter Sensor & Bracket are mounted properly - maybe swap with Web Sensor - check Shutter rotates freely when turned with your finger.
    thanks sir
    i allready check sensor and replace by another one , not help
    when i rotate by finger , the shutter not complete rotatting , just for short arc and stopping
    thanks

  6. #6
    Service Manager 10,000+ Posts
    IR 5570 error code 840

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: IR 5570 error code 840

    Quote Originally Posted by adel_nathan View Post
    thanks sir
    i allready check sensor and replace by another one , not help
    when i rotate by finger , the shutter not complete rotatting , just for short arc and stopping
    thanks
    _____\
    : Because of the structure of the fixing upper unit, it is possible that the metal plate, to which the shutter HP sensor (PS53) is attached, is pushed upward by the hand and deformed when the unit is removed from the machine. If this plate is deformed, E840-0001 will be displayed. Therefore, be sure not to deform it when removing the fixing upper unit. The part number for the bracket is FC6-3839-000

    pictures below show the improper position of the stopper.


    These pictures below show the proper position of the stopper.


    The stopper is located on the rear of the Fixing Assembly pictured below.


    Last edited by teckat; 03-24-2014 at 01:51 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: IR 5570 error code 840

    pictures below show the improper position of the stopper.


    i checked this stopper , it's good and in its' place
    i try to remove shutter , and reassemply the fixing unit without it
    it works good for one day , but in next day , the error appear again
    please help
    [/QUOTE]

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Sep 2009
    Location
    fairfax, VA
    Posts
    73
    Rep Power
    31

    Re: IR 5570 error code 840

    1. You should never remove the shutter and reassemble unit to run. It is an integral part of the heater unit and necessary to achieve proper fixing temperatures.
    2. Common problem with disassembly and reassembly with this type of fuser is forgetting to remove and reposition shutter gear lock pins. There are two, one at the front and one at the rear. They are step 1 in fuser upper disassembly instructions and they prevent the shutter gears from rotating to assist in alignment durring reassembly.
    3. Check that both ends of the shutter drive shaft is properly seated on its positioning pegs front and rear and that the gears on the ends properly meet the shutter rotation gears.
    4. If Durring disassembly you removed the shutter completely from heater unit, it is possible that you put it on in the wrong direction, on end has a tab that runs in a channel on the heater allowing complete rotation. Put on wrong it travels in the seam of the heater which only goes halfway around.

    If all above is not the case replace shutter motor.
    Hope it helped

    -R
    Some people may say I have a short temper, but I prefer to call it
    "A swift and assertive reaction to bullshit"

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Jul 2011
    Posts
    99
    Rep Power
    0

    Re: IR 5570 error code 840

    2. Common problem with disassembly and reassembly with this type of fuser is forgetting to remove and reposition shutter gear lock pins. There are two, one at the front and one at the rear. They are step 1 in fuser upper disassembly instructions and they prevent the shutter gears from rotating to assist in alignment durring reassembly.
    -R[/QUOTE]

    thanks and thanks alot for all try to help me
    the pins you mentioned solved the problem
    thanks again

  10. #10
    Service Manager 1,000+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    1,034
    Rep Power
    42

    Re: IR 5570 error code 840

    The pins should have been mentioned in the manual you read

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here