Originally Posted by
Desert Rat
When using the doc fdr the lower portion of the page (toward the front of copier) is darker than the top.
I did run the CCD adjust from the function menu and then ran the SH-PS-ST. The SH-PS-ST ended with N/G.
This has been an on going problem for a while. Now when a 17" page is copied the trail end of the page
has a light band about 3" or so from the trail edge.
I don't have many scanner problems so I am at a loss for what to do, I'm looking for some guidance.
The back side of the platen is clean, the reflectors and lamp are clean. I could not detect any difference
in the lamp as it traveled the length of the 17" paper.
Prints from the service mode look normal. I did at one time take the cover off of the lens but that did not
help.
Any advice would be welcome
Thanks
DR
Bookmarks