Canon imagepress c1 err please help me !
Canon imagepress c1 err please help me !
Check your transfer unit
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
--------------------------------------------------------------
xx86= Patch image sampling (center) error 2
DISPLAY>DENS>DENS-S-Y/M/C/K (patch image measurement value) - DISPLAY>P-SENS-P (Drum background measurement value)
</= 30.
1. Execute the test print (TEST>PG TYPE=5&96, THRU=1), check the evenness of image -> check the Developing Motor.
2. If the value of DISPLAY>DPOT>PT-LPW-Y/M/C/K is more than 250,
(1) Clean the Dust-proof Glass and check.
(2) Replace the drum.
(3) Replace the Laser Scanner Unit/clean inside.
-------------------------------------------------------------------------------------------------------------------
remember to also>>>>>>>>>>>>
CLEAN PATCH SENSOR--------------------------------------------------------
1. After cleaning the Patch Sensor, execute FUNCTION>MISC-P>PT-LPADJ.
Select DISPLAY>DENS>PCH-LED2, and check the value of PCH-LED2 (1).
2. After removing the Patch Sensor Shutter,execute FUNCTION>MISC-P>PT-LPADJ.
Select DISPLAY>DENS>PCH-LED2, and check the value of PCH-LED2 (2).
3. If (1) is more than 240 and (2) is between 80 and 240, replace the shutter and solenoid. Then, execute PT-LPADJ again.
If the value is between 80 and 240, complete the remedy.
If not, go to step 4.
4. After replacing the Patch Sensor, execute PT-LPADJ. If the value is between 80 and 240, complete the remedy.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks Teckat , my printer is worked !
Bookmarks