clc 5151 network problem and print quality

[Rudi Hattingh]

hi
i have problem whit my printer. i set up the ip can ping it but the prnter do not want to install and print. can see it over the network.
also form usb.

and the other problem is if i print the printer prints like you need glasses .

[teckat]

hi
i have problem whit my printer. i set up the ip can ping it but the prnter do not want to install and print. can see it over the network.
also form usb.

and the other problem is if i print the printer prints like you need glasses .

---------------------------------------------------------------
under Additional Function > System Settings > check if Print Job Restriction is turned "On" / if so turn to "0" OK!!!

Using a USB Device
Set Use USB Device to 'On' to connect a computer with the machine via the USB port.
1 Press [System Settings] [USB Settings] [Use USB Device].
2 Select [On] or [Off] press [OK].
Using a USB Host
Set Use USB Host to 'On' to connect a host device with the machine via the USB port.
1 Press [System Settings] [USB Settings] [Use USB Host].
2 Select [On] or [Off] press [OK].

Blur Prints= u need to remove ITB UNIT> INSPECT>REMOVE ITB SHEET>CLEAN> & CLEAN LARGE BLACK DRIVE ROLLER
also see

do u have a Fiery connected if so Printer needs to be set up under Control Panel Print Tab & not under the regular Add Functions>System Settings--

First your Fiery needs to be set>>
1. Enter Service mode (Additional Functions key> 2 and 8 keys together > Additional Functions key).
2. Select Copier > Option > Int-Face > IMG-CONT> "3"

[Rudi Hattingh]

hi
i have only usb host option. and sum how i can not put in my ip address in there is no option any more.
printer print great now if i make a copy. thank you just that i can not print form my pc. network or usb

rudi

[teckat]

hi
i have only usb host option. and sum how i can not put in my ip address in there is no option any more.
printer print great now if i make a copy. thank you just that i can not print form my pc. network or usb

rudi

================================================== =

slow down------------

u have two options to put in your IP ADDRESS

- answer these
-do u have an external box (Fiery imagePass)Network Printer Unit H1) or a ColorPASS-GX100 connected to back of Printer
if yes -First your Fiery needs to be set>> to "3"
1. Enter Service mode (Additional Functions key> 2 and 8 keys together > Additional Functions key).
2. Select Copier > Option > Int-Face > IMG-CONT> "3"when set> u can input your settings under PRINTER TAB on top of control panel --->

if no -the Printer needs to be set >>to "0"
1. Enter Service mode (Additional Functions key> 2 and 8 keys together > Additional Functions key).
2. Select Copier > Option > Int-Face > IMG-CONT>"0"when set>u put your settings under> press > ADDITIONAL functions key> then System Settings

[Rudi Hattingh]

i have a fiery but if i set it to 3 my network and usb options is gone. it was on "0" set it to 3 then it give me only proxy at the network settings and at the usb the host option. no device

[Rudi Hattingh]

will let you know i understand wrong got the setting thanx

[Rudi Hattingh]

HI
if i go to printer tab it just say please wait

[Rudi Hattingh]

My feiry model is feiry X3IM 4VX5 AA

[teckat]

My feiry model is feiry X3IM 4VX5 AA

===================
forget about Host Option for now
Printing from a PC via a USB cable can only be used when the Canon Multi-PDL Printer Kit is installed. //U have a H1 Fiery & not a Print Kit-------

Copier > Option > Int-Face > IMG-CONT> must be set to"3" for Fiery to Function./
also the Default Password for set up when prompted is Fiery.1 (do not use anything else)

OK !!= a Canon Inc Fiery x3im 4vx5 aa Printer Controller that's an H1 FIERY
PS (PostScript) Controller------


?- who installed this Fiery--
?- did u check the cable setup from Fiery to Printer//CHECK THE SOURCE OF THE POWER BEHIND THE PRINT SERVER MAIN UNIT AND CABLE CONNECTIONS-

Your Network settings can only be set up under the PRINTER TAB
================================================== =========================
Printer Kits for many of the newer Canon devices are LMS based. The BootROM on these devices will always end with a C.
You can check for/ or if a LMS-based Printer Kit is registered on the Canon device >
Perform the following steps:

1. Press the [Counter Check] button on the copier control panel.

2. Hit the [Device Configuration] button on the LCD screen.

3. Scroll down through all of the available pages on this Device Configuration screen. Look for either PS, PCL or UFRII.

NOTE:-Sending documents through e-mail or I-fax is available only if the Color Universal Send Kit is purchased & License is activated.
Sending documents to a file server or an inbox is also available. Sending documents via fax is available only if the optional Super G3 FAX Board is installed. Sending documents to an inbox is also available.

--If only the Color Universal Send Kitis activated, it is displayed as [Send].
Color Universal Send Kit.JPG
--If the Color Universal Send Kit is activatedand the optional Super G3 FAX Board is installed, it is displayed as [Send].
Super G3 FAX Board is installed.JPG
If only the optional Super G3 FAX Board is installed, it is displayed as [Fax].
FAX G3 only.JPG You can use the Send and Fax functions of CLC5151/CLC4040/iR C4580i/iR C4080i only if the optional
Color Image Reader-F1 or Color Image Reader-E1 is attached.
-------------------------------------------------------------------------------------------------------------------------------------

Network Scanning*
To use this function, the machine is required to be connected to a network, and the Color Network ScanGear software* installed at your computer.

this H1 install book is in English > see attachment

FOLLOW INSTRUCTIONS

[Rudi Hattingh]

HI
there is no ps,pcl or ufrII in the setings only imge reader f1. if i want to do the settings the printer only shows please wait....