Originally Posted by
CT Copier Repair
Machine goes into error
first ti,e found the spring popped
reseated it and it tried to make a copy and jammed
found broken paper actuator so I replaced that
now in a hard e075-002 again
Looked at the sensors if I'm reading it correctly P03 bit 12 should read 1 its at 0
I moved it and no change
and just to make sure I'm not losing my mind the 0 bit is the 1st left rianbit
been awhile since worked on canons been mostly Xerox and KM production machines
Thanks
Brian
Bookmarks