Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    0

    Help me E000280-003 IR3245

    Help me IR3245 Show Code E000280-003 How to do it? Thank you.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jan 2010
    Location
    Minneapolis, MN
    Posts
    132
    Rep Power
    30

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by thi View Post
    Help me IR3245 Show Code E000280-003 How to do it? Thank you.
    WOW!!!!! Blackcat is going to LOVE you!

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Posts
    125
    Rep Power
    27

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by thi View Post
    Help me IR3245 Show Code E000280-003 How to do it? Thank you.
    Reading unit communication error
    check the flexible cable
    check CCD.


  4. #4
    Service Manager 10,000+ Posts
    Help me E000280-003 IR3245

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by thi View Post
    Help me IR3245 Show Code E000280-003 How to do it? Thank you.
    =insufficient insertion of the reading unit connector.
    Below is a snap shot of the RCON pcb if one were to look down on it


    Try inspection & re-seating all connections of the Reader Controller,& Main Controller PCB & Reader & CCD

    or
    Replace the CCD flat cable, P/N FM3-7133-000
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Senior Tech 100+ Posts
    Join Date
    May 2009
    Location
    Elizabeth, NJ
    Posts
    107
    Rep Power
    32

    Re: Help me E000280-003 IR3245

    Hi, I found this post because i have the same error on a 3225. I replaced the CCD flat cable and tried reseating the other cables with the red mark in the picture and am still getting the error.
    Im thinking the next step would be to replace the ccd or the reader controller. I tried clearing the reader cont and re-input the values but no good. Does anyone have any suggestions.
    Thanks

  6. #6
    Service Manager 10,000+ Posts
    Help me E000280-003 IR3245

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by copyhere View Post
    Hi, I found this post because i have the same error on a 3225. I replaced the CCD flat cable and tried reseating the other cables with the red mark in the picture and am still getting the error.
    Im thinking the next step would be to replace the ccd or the reader controller. I tried clearing the reader cont and re-input the values but no good. Does anyone have any suggestions.
    Thanks
    ----------------------
    that flat cable> sometimes looks like it's inserted properly> when it usually is not/ remove & re-check it

    the connectors on both the RCON and Main Controller needed to be removed & re-seated.

    make sure printer plug is out from wall outlet before action

    ?? does the CIS carriage unit move back when pulled out of position> & power is turned on
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Senior Tech 100+ Posts
    Join Date
    May 2009
    Location
    Elizabeth, NJ
    Posts
    107
    Rep Power
    32

    Re: Help me E000280-003 IR3245

    thanks for the suggestions The ccd cable I have checked very carefully many times how it is seated and both ends of the one from rcon to mcon also.
    The ccd lights up and the carriage does move.

  8. #8
    Service Manager 10,000+ Posts
    Help me E000280-003 IR3245

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by copyhere View Post
    thanks for the suggestions The ccd cable I have checked very carefully many times how it is seated and both ends of the one from rcon to mcon also.
    The ccd lights up and the carriage does move.

    So Power on sequence is fine

    Sequence at Power-On
    - F: Scanner motor moves forward (toward right). ------>
    - B: Scanner motor moves backward (toward left). <------
    - Light-ON: LED on CCD unit lights-on.
    - ON: When CCD unit HP sensor (photo interrupter type) detects.

    what is your sub code ?

    when does error e280-xxxx pop up ??

    -using the ADF ??> press of start
    -or using glass doc> press of start / or error from either selection
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Senior Tech 100+ Posts
    Join Date
    May 2009
    Location
    Elizabeth, NJ
    Posts
    107
    Rep Power
    32

    Re: Help me E000280-003 IR3245

    The sub code is 003. The led and movement sequence is good. The progress bar on the display when you power on moves a little bit and pauses for a while then it starts to move again and then throws the code about halfway before it finishes to get to the ready screen. I have tried to change the reader controller and the ccd unit and the cable between the reader controller and the main controller and still the same.

  10. #10
    Service Manager 10,000+ Posts
    Help me E000280-003 IR3245

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Help me E000280-003 IR3245

    Quote Originally Posted by copyhere View Post
    The sub code is 003. The led and movement sequence is good. The progress bar on the display when you power on moves a little bit and pauses for a while then it starts to move again and then throws the code about halfway before it finishes to get to the ready screen. I have tried to change the reader controller and the ccd unit and the cable between the reader controller and the main controller and still the same.
    👀
    👃
    CIS carriage unit.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here