Paul, that's for U, do u have the latest version of SST?u have portuguese language and firmware for ir105, 9070 and ir7095? if u do what's cost to me?.
Thanks paul.
Paul, that's for U, do u have the latest version of SST?u have portuguese language and firmware for ir105, 9070 and ir7095? if u do what's cost to me?.
Thanks paul.
================================================== ====
Language Support
language.JPG
iR 9070/105+/8070/85+
iR 7105/7095/7086/7105P
------------------------------------------------------
COPIER>DISPLAY>VERSION
LANG-PT
Indicates the version of the Portuguese language module.
================================================== =====================
COPIER>OPTION>BODY>CONFIG
Use it to select from multiple pieces of firmware stored on the hard disk for country, language, destination, paper size configuration.
Setting XXYYZZAA
XX: country (JP), YY: language (ja), ZZ (00): destination, AA (00): paper size configuration; as determined by
COPIER>DISPLAY>USER>LANGUAGE
The selections in parentheses indicate default selections.
<Using the Mode>
1) Select ‘CONFIG’.
2) Select a specific item to change (highlight), and press the +/- key.
You can change XX: country and AA (00) paper size configuration.
3) Press the +/- key to scan through the selections.
4) Bring up the selections for each time, and press the OK key.
5) Turn off and then on the main power switch.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
if you need it Cristian i can get it for you, if Paul can't
Life is a learning continuum...
@bipc.............I only have it in English.
If you still need it mail me and pronto.
Bookmarks