print out not stick
Hello everyone.
I have one IR2870 with the image not stick to the paper, I mean when I rub it, the toner can be removed from the paper.
I have try change these parts
Heater file Unit ( whole unit ) genuine part.
pressure roller
ac drive pcb
dc Controller Pcb
power supply pcb
The fix-temp set to 7 but still not satisfied.
anyone can give me an idea?
Thanks in advance.
What type of media, at what media settings? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
change the cylander and your problem will solve
Distinguished road makes you jewel in rough
Hello,
Verify that the right door closing mechanism works correctly: When closing the door the fixing pressure roller must come in contact with the fixing film (with enough pressure). Have a look on the pressure roller bushings and the film installation.
Pages de ir4570_2870_series-sm.jpg
Rachid.
"Find a job you love and you’ll never have to work a day in your life." Nagy's father
Blahhh!!! Just use some hairspray after the copies come out. That should hold it down. I would recommend Aquanet.
Color is not 4 times harder... it's 65,000 times harder.
most def what rachid has suggested. If it's one tooth off it'll give you 0207's and poor fixing.
Hello,
Sorry for late to check his post, By the way my problem already solved, the solution is by changing new packing of paper in deferent paper brand.
I think that paper was low quality
Thanks all
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks