Thanks: 
Likes: 
Dislikes: ____;-Originally Posted by win32
Print jobs are not held in HDD.
Where do u see these jobs ?
On PC\ LAPTOP ?
What are u talking about initilalized ?
U mean MN CON CLEAR ?
____;-
Print jobs are not held in HDD.
Where do u see these jobs ?
On PC\ LAPTOP ?
What are u talking about initilalized ?
U mean MN CON CLEAR ?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
i see these jobs on my printer ,, not on pc or laptop ,, i've more than 5000 i think that's the problem ,, and i have to remove them to become sur
i printed many of them by pc
others : in local printing of the machine "without a PC or laptop", cmyk print test, rgb, and the configuration page ,,, before when I print local test machine, it was ok, but now the printed
pages are encrypted and unreadable , and when i print from the pc ,, the machine's stop and restart
Last edited by win32; 07-25-2014 at 07:52 AM.
Additional Functions>System Settings>Restrict Printer Jobs.
Check This setting ?
Make sure it is set to OFF.
After setting it to off, print jobs should again printing
Did u ry a MN-CON CLEAR in service mode ?
Or------>
Perform an MMI Clear ----To clear MMI, perform the following steps. Service Mode > Function > Clear >MMI
*Note Be sure to run a User Data Report before performing a MMI clear, because the IP address will be cleared out during this operation.
Additional Functions > Common Settings > Standard Local Print Settings > Erase Document After Printing > set to "ON"
Last edited by teckat; 07-27-2014 at 09:56 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I made clear mmi, mn-con;;;;; but the print job is still , should i remove " SRAM PCB " and re seat ???
i tryed to follow this steps , but there is no way in the brwoser to delete a print job ,,,,
add functions > system settings > initialize all data. If this doesn't nuke it nothing will.
i think also to do this before initializing ,, what do you think about
============================
go for it/
u did not say that the print jobs were stuck in PRINTING QUE MENU on your PC
Believe U said they were listed in 5185 printer menu screen ?/ could be wrong interpreting your post
JOBS stuck on a PC's DEFAULT PRINTERS QUE > is different than Jobs shown on 5185 Control Panel PRINT MENU
1-were these scans to a PC ?
2-Network PC prints from PC ?
3-Scans to e-mail recipients ?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
i maid initializa all data, the print job are gone ,, but the truble still (not printing), "copy has become very blades
yes I said it, and when I tried the sollution on youtube it does not work, after all I've done initializing data, but the now the work job has been disappeare, printing still does not work, the copy has lost quality============================
go for it/
u did not say that the print jobs were stuck in PRINTING QUE MENU on your PC
Believe U said they were listed in 5185 printer menu screen ?/ could be wrong interpreting your post
JOBS stuck on a PC's DEFAULT PRINTERS QUE > is different than Jobs shown on 5185 Control Panel PRINT MENU
1-were these scans to a PC ?
2-Network PC prints from PC ?
3-Scans to e-mail recipients ?
Posting Permissions
Reply With Quote
Bookmarks