U mean the right & left deck
The right/left deck does not possess a mechanism to detect the size of paper, and the machine finds out the size
of paper as follows:
(A4, B5, LTR)
[1] The position of the paper size guide plate of the cassette is changed.
[2] A paper size is registered in service mode.
SERVICE MODE:
COPIER> OPTION> CST> P-SZ-C1
Use it to specify a paper size for the right deck.
Settings:
6: A4, 15: B5, 18: LTR
COPIER> OPTION> CST> P-SZ-C2
Use it to specify a power size for the left deck.
Settings
6: A4, 15: B5, 18: LTR
================================================
OR>>>>
Paper decks One and Two are displaying to
load paper. Paper is physically lifting in the paper decks to the feed rollers. The paper source is shown as blank in user mode selection.
A DCON Clear and power cycling the machine may be needed to resolve the message to load paper.
To perform a DCON Clear, enter Service Mode Level 1> additional functions > 2 and 8 > additional functions. Select Copier > function > Clear. Select DCON Clear, and press ok. Power cycle the machine, after performing the clear.
NOTE:
Make sure to print out P PRINT settings before doing a DCON CLEAR/
then re-input those paper settinga
Bookmarks