Try swapping laser assembly. Have seen issues caused by bad lasers on these units
Try swapping laser assembly. Have seen issues caused by bad lasers on these units
Ram clears and install newest firmware?
Ram already been clear & the newest firmware apply also. Waiting for Canon to issue a new firmware for this issue!!
==================
That White Gap in PG10 is a Laser Issue
Tech Support_wait.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
had this myself.
turned out to be the laser shutter mechanism wasn't playing ball correctly.
take out the main drive and re-set it and check the opperation of the laser shutter mechanism.
Bookmarks