Canon IPF 8300 Error Code

[mramlawi]

Dear All ,

i have IPF8300 at my client he called me and told me its giving him Multi Sensor Error on screen , so i visited him and i took with me the Multi Sensor also i took with me the Carriage PCB because as i read it always make a problem ,so i turned the machine on it occurs error code 03130031-2f52 and the carraige didnt move at all , so i changed the Multi Sensor nothing happen then i changed the Carraige PCB Board the machine works but gave me must change the right head i changed it then requested the left Head i also changed it the machine get ready ,but when i want to make a test print or a nozzle check the machine gave me Error 03130031-2f48 .i asked me collage he told me its the Carraige Unit problem ,can any one told me why this happen Beacuse i dont know the answer my clients asked me by the way the machine putted all the time on ups ,also this happened with me since 1 week same series at another client ,and this cost too much to client .is theres any bulltin for this shet they curse the time that thee buy Canon plotter .

[teckat]

Make sure u have the latest firmware--iPF8300 Firmware

Version v1.26

Released on 19-02-2014

Caution: if not already installed>(before u update firmware)

Install the Firmware Update Tool if it is not installed.

Operating Systems for Firmware Update Tool

• Firmware Update Tool Version 24.00 for Windows 32bit
• Firmware Update Tool Version 3.60 for Windows 32bit
• Firmware Update Tool Version 24.00 for Windows 64bit
• Firmware Update Tool Version 3.60 for Windows 64bit
• Firmware Update Tool Ver.24.00 for Mac OS X v10.6-v10.9
• Firmware Update Tool Ver.3.60 for Mac OS X v10.6-v10.8
• Firmware Update Tool Ver.3.21 for Mac OS X v10.2-v10.5

also read this attached_ERROR CODE PUB/ for

Error Codes 2618/2F44/2F48/2F49/2F50/2F51/2F52 (REVISED)
describes a clear explanation of remedial actions for the occurrence of the above-captioned errors.

[mramlawi]

Make sure u have the latest firmware--iPF8300 Firmware

Version v1.26

Released on 19-02-2014

Caution: if not already installed>(before u update firmware)

Install the Firmware Update Tool if it is not installed.

Operating Systems for Firmware Update Tool

• Firmware Update Tool Version 24.00 for Windows 32bit
• Firmware Update Tool Version 3.60 for Windows 32bit
• Firmware Update Tool Version 24.00 for Windows 64bit
• Firmware Update Tool Version 3.60 for Windows 64bit
• Firmware Update Tool Ver.24.00 for Mac OS X v10.6-v10.9
• Firmware Update Tool Ver.3.60 for Mac OS X v10.6-v10.8
• Firmware Update Tool Ver.3.21 for Mac OS X v10.2-v10.5

also read this attached_ERROR CODE PUB/ for

Error Codes 2618/2F44/2F48/2F49/2F50/2F51/2F52 (REVISED)
describes a clear explanation of remedial actions for the occurrence of the above-captioned errors.

thank u teckat