Hello All! I need to know how to set the iRC4080 black Laser to home position Manually?
I know how to set color's laser to home position, But I'm not sure about Black Laser home position.
Any help would be appreciate, Thanks in advance!
Hello All! I need to know how to set the iRC4080 black Laser to home position Manually?
I know how to set color's laser to home position, But I'm not sure about Black Laser home position.
Any help would be appreciate, Thanks in advance!
I mean, Is there any difference between black and color laser home position? sorry I wasn't clear enough in the above question.
==================
NO ALL THE SAME <> see PDF Color Shift Prevention / Correction
-----What is your issue
LASER.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks both of you boys by replying, I already fix this issue, (vertical lines color displacement) I set the black laser to Home position and entered the original p-print original values, now machine is working, but this afternoon someone in the office was making some black prints and got this error code E000747-051C, any suggestion is appreciate.
Remove & clean board ends ,then reseat all boards on the main controller.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I just went to turn off Limited functions, Easy Money!
Bookmarks