Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    iRC4080 Black Laser to home Position

    Hello All! I need to know how to set the iRC4080 black Laser to home position Manually?
    I know how to set color's laser to home position, But I'm not sure about Black Laser home position.
    Any help would be appreciate, Thanks in advance!

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    Re: iRC4080 Black Laser to home Position

    I mean, Is there any difference between black and color laser home position? sorry I wasn't clear enough in the above question.

  3. #3
    Service Manager 10,000+ Posts
    iRC4080 Black Laser to home Position

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iRC4080 Black Laser to home Position

    Quote Originally Posted by Smartmind View Post
    I mean, Is there any difference between black and color laser home position? sorry I wasn't clear enough in the above question.
    ==================




    NO ALL THE SAME <> see PDF Color Shift Prevention / Correction

    -----What is your issue

    LASER.JPG
    Attached Files Attached Files
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: iRC4080 Black Laser to home Position

    Quote Originally Posted by Smartmind View Post
    Hello All! I need to know how to set the iRC4080 black Laser to home position Manually?
    I know how to set color's laser to home position, But I'm not sure about Black Laser home position.
    Any help would be appreciate, Thanks in advance!
    SRV Mode 2 > FUNC > CLEAR > REG > FUNC > LASER LD Y-M-C.
    ADD FUNC > Perform Quick Adjust > AUTO COLOUR CORRECTION.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    Re: iRC4080 Black Laser to home Position

    Thanks both of you boys by replying, I already fix this issue, (vertical lines color displacement) I set the black laser to Home position and entered the original p-print original values, now machine is working, but this afternoon someone in the office was making some black prints and got this error code E000747-051C, any suggestion is appreciate.

  6. #6
    Service Manager 10,000+ Posts
    iRC4080 Black Laser to home Position

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iRC4080 Black Laser to home Position

    Remove & clean board ends ,then reseat all boards on the main controller.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    Re: iRC4080 Black Laser to home Position

    Quote Originally Posted by teckat View Post
    Remove & clean board ends ,then reseat all boards on the main controller.
    Thanks! I was thinking the same, I will do that tomorrow.

  8. #8
    Service Manager 10,000+ Posts
    iRC4080 Black Laser to home Position

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iRC4080 Black Laser to home Position

    Quote Originally Posted by Smartmind View Post
    Thanks! I was thinking the same, I will do that tomorrow.


    Don't forget memory ends,
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    Re: iRC4080 Black Laser to home Position

    Quote Originally Posted by teckat View Post



    Don't forget memory ends,
    Thanks buddies! Boards cleaned and reseated this morning, everything worked fine, but this afternoon somebody told me that machine shows a new massage (Finisher can not be used), they say that the machine can do prints and copies, but finisher x1 is not working properly.

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    San Bernardino, CA
    Posts
    61
    Rep Power
    26

    Re: iRC4080 Black Laser to home Position

    I just went to turn off Limited functions, Easy Money!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here