Canon ir 2380 drum replacement

[dickierock]

Hi,
I am mainly kyo /konica tech so havn't worked on many canons but the k drum needs replacing and looks easy enough to do.
Just wondering when the drum unit is replaced do I need to reset in the maintenance mode or is the drum chipped?
Anything else like pm counters that I should reset?
Thanks.

[MFPTech]

Hi,
I am mainly kyo /konica tech so havn't worked on many canons but the k drum needs replacing and looks easy enough to do.
Just wondering when the drum unit is replaced do I need to reset in the maintenance mode or is the drum chipped?
Anything else like pm counters that I should reset?
Thanks.

Canon machines do not display a warning for drums but you can check / reset the counters in Service mode under counters / durables 1.
Hope this helps.

[dickierock]

Hi MFPTech,thanks.
The drum needs replacing alright,so i need to know how to get into service mode and how to reset the drum unit counter and pm counter if available.
Thanks.

[ernesto]

Hi
IRC 2380 does not need to reset drum, it is automatic.

What do you have to do when you replace a drum in a taskalfa 250ci?



All the best

[dickierock]

Hi ernesto,thanks,
Is there a pm counter to reset? If so how do I get to maintenance mode?

Re; 250CI
After drum replacement,in maintenance mode
perform U119,Drum set-up
U930, Clear charge roller
U464, Ac Calibration
Colour Cal + Reg
U412, Density
U410, Halftones.

All the best

[Kalamar]

for entering the service mode, just press the additional functions key (a star with a circle around) then 2 and 8 somultaniously and the add funtctions key again, then you´ll get into the service mode

the drum counter is reset automatically on color machines, so no need to reset anything!!!

you can find the drum counter in service mode under copier>counter>drbl-1>pt-drm and the colors are drm-y/c/m if i´mm not totally wrong

[Harry]

ther is a chip on this drum

good day