Oh guys just help me, with this problem, CANON 1024 IR when you command 10 copies it prints 1 copy and it Displays system Error 100 but have checked all parts 1. drum unit switct it is ok
what could be that? best Regards Muleme.s,k
Oh guys just help me, with this problem, CANON 1024 IR when you command 10 copies it prints 1 copy and it Displays system Error 100 but have checked all parts 1. drum unit switct it is ok
what could be that? best Regards Muleme.s,k
What could be the problem when Canon IR 1024 Displays system Error 197
help guys
STEPHEN,MK
=================
Make sure your outlet is grounded properly & supplying correct voltages
EX.- Ground to Neutral should be 0v > 0.5 no more.
poor ground could damage Main Controller
is E197 occurring at power on.
Check the connectors of the DC controller PCB and image processor PCB.
E100= at power on
make sure DC CONTROLLED is not covered with toner dust/ dust
E197Printer engine communication error/
-try to reload the System Software
E100BD detection PCB failure
- Check the connector of the BD detection PCB.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Hi,
I had the same problem ( Error 197) four mounth ago....In my case it was the fixing unit...I swap it with other machine and both of them are working right until now
ALL THE BEST
Bookmarks