We need install config cd or proper configuration for set-up on tcpip network running pc and mac. Pc won't recognize M3. Mac prints to
copier, but cannot print more than 1 copy.
We appreciate any help.
Thanks,
Bruce
Orlando, FL
We need install config cd or proper configuration for set-up on tcpip network running pc and mac. Pc won't recognize M3. Mac prints to
copier, but cannot print more than 1 copy.
We appreciate any help.
Thanks,
Bruce
Orlando, FL
------------------------------------------------------
did u do the original M3 set up 6570
make sure u are using correct drivers for M3
Canon U.S.A. : Support & Drivers : imagePASS-M3
in service mode>
COPIER > OPTION > INT-FACE > IMG-CONT-> must be set to "4".
COPIER > OPTION > INT-FACE > CNT-TYPE-> must be set to:"1"
if service mode settings are changed, the copier must be restarted for the changes to take effect.
imagePass M3 Install+SG.pdf
Last edited by teckat; 07-28-2014 at 01:56 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks