Change new hdd. Then up e602-002 ir7095
Change new hdd. Then up e602-002 ir7095
Did you install the system software on it !!?
Distinguished road makes you jewel in rough
-----------------------------
no mind readers heremind-reader real.jpg
do u have Models Firmware loaded into SST ?
1-PRINTER Model ?
2-is HDD the correct one for your model ?
3-did u first format new HDD using SST Program
4-Are u a trained tech
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Last edited by teckat; 08-16-2014 at 03:47 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
After Replacing the Hard Disk:
1) Formatting the HDD:
Start up the machine in safe mode (i.e., turn on the main power while holding down the 2 and 8 keys).
Using the HD formatting function of the SST, execute full partition formatting.
2) Downloading the System Software:
Using the SST, download the following: System, LANG, RUI, PS-FONT, OCR dictionary, SSL encryption key, SSL CA certificate, MEAP content.
3) Execute the following service mode item:
COPIER > FUNCTION > CLEAR > CA-KEY (Level 2)
4) Turn off and then on the power.
Replacing the Hard Disk on IR7095 is not as easy as 123.
First you must know the version of the Bootrom is it V-1 or V-2, then choose the right System Software.
You can find it on a previously printed P-PRINT.
Register the System software in the SST and Download to the machine.
Bookmarks