Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Aug 2014
    Posts
    10
    Rep Power
    20

    Question Canon IR 5075 Legal Paper Cutting

    I'm currently experiencing some difficulties with my Canon IR 5075 its scanning Legal paper Normally but when it prints out half of the image on the legal paper its cut sometimes half way most of the times it cuts the image when ever it prints out Please help me

  2. #2
    Service Manager 10,000+ Posts
    Canon IR 5075 Legal Paper Cutting

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 5075 Legal Paper Cutting

    Quote Originally Posted by digenius48 View Post
    I'm currently experiencing some difficulties with my Canon IR 5075 its scanning Legal paper Normally but when it prints out half of the image on the legal paper its cut sometimes half way most of the times it cuts the image when ever it prints out Please help me




    'Long Strip Original' will automatically rotate the scanned originals during the scanning process when push scanning via Universal Send. To enable the 'Long Strip Original' option, follow these steps:
    1. On the copier control panel, select the Send tab.
    2. Pull down the 'Scan Settings' drop down menu and select 'Option'.
    3. Press the 'Document Size Select' button on the resulting Scan Settings screen.

    4. Press the 'Long Strip Original' button. The size will automatically switch to 'Auto'. The feature is enabled when the option is highlighted in blue.

    5. Press 'Done'.
    6. Press 'OK'.
    7. Select your destination and send the job by pressing the Start key.
    8. The resulting image will be automatically rotated.

    * Note - Be sure to load your originals with the bottom short edge going into the feeder (see below). If you load your originals the other way, the resulting image will be portrait but upside down.
    Correct loading orientation:
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Sep 2011
    Posts
    849
    Rep Power
    37

    Re: Canon IR 5075 Legal Paper Cutting

    Long mode originals will not work in duplex, fyi

  4. #4
    Technician
    Join Date
    Aug 2014
    Posts
    10
    Rep Power
    20

    Re: Canon IR 5075 Legal Paper Cutting

    Quote Originally Posted by northernlife View Post
    Long mode originals will not work in duplex, fyi
    Okay thats why im not finding the send tab, also scan setting i cant seem to find these

  5. #5
    Service Manager 10,000+ Posts
    Canon IR 5075 Legal Paper Cutting

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 5075 Legal Paper Cutting

    Quote Originally Posted by digenius48 View Post
    Okay thats why im not finding the send tab, also scan setting i cant seem to find these
    -----------------------------------------------------------------------------------------
    IN SERVICE MODE LEVEL 2
    COPIER > OPTION >USER>MF-LG-ST= SET TO "1" > Use it to set the Extra Length key.


    did i miss something ?
    u'r all over the place/ since when did u mention u were duplexing legal

    + now u talk about missing SEND TAB & Scan Settings

    1. Enter Service Mode (press Additional Functions, 2 and 8 simultaneously, then Additional Functions).
    2. Enter Level 2 of Service Mode (press Additional Functions, then 2).
    3. Select Copier > Option > Body > UI-RSCAN.
    4. Set UI-RSCAN to 1 to display the Scan tab

    1-Check / Re-seat the power connector for the Reader Unit.


    2-Check / Re-seat the interface connections.
    Last edited by teckat; 08-19-2014 at 03:16 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Technician
    Join Date
    Aug 2014
    Posts
    10
    Rep Power
    20

    Re: Canon IR 5075 Legal Paper Cutting

    Quote Originally Posted by teckat View Post
    -----------------------------------------------------------------------------------------
    IN SERVICE MODE LEVEL 2
    COPIER > OPTION >USER>MF-LG-ST= SET TO "1" > Use it to set the Extra Length key.


    did i miss something ?
    u'r all over the place/ since when did u mention u were duplexing legal

    + now u talk about missing SEND TAB & Scan Settings

    1. Enter Service Mode (press Additional Functions, 2 and 8 simultaneously, then Additional Functions).
    2. Enter Level 2 of Service Mode (press Additional Functions, then 2).
    3. Select Copier > Option > Body > UI-RSCAN.
    4. Set UI-RSCAN to 1 to display the Scan tab

    1-Check / Re-seat the power connector for the Reader Unit.


    2-Check / Re-seat the interface connections.

    Yeah sir followed every step an still the scan tab has not appear well im just trying to learn these things because im new at this technician stuff the copier is an CAnon IR 5075 an where can i find the scan tab by the way because its not appearing on the screen also i checked the additional function to see if i can find it but no luck please help me if u can to this solution

  7. #7
    Service Manager 10,000+ Posts
    Canon IR 5075 Legal Paper Cutting

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 5075 Legal Paper Cutting

    did you ever have a SCAN TAB shown on panel

    The standard settings for each function of the machine (Copy, Mail Box, Send, and Fax) are
    already set at the factory,

    do u see an arrow ----> at top right of control panel ????
    if so, touch it to scroll over to next tabs

    Network Scanning*

    The Network Scan function enables you to use the iR5075/iR5075N/iR5065/iR5065N/iR5055/iR5055N as a conventional scanner. You can scan a document using the machine, and read the data in an application you are using on your computer.

    To use this function, the machine is required to be connected to a network, equipped with the Printer function (standard-equipped for the iR5075N/ iR5065N/iR5055N), and Network ScanGear* to be installed on your computer. You can scan images of up to A3 in size at a resolution of 600 x 600 dpi.

    tab.JPG
    OPTIONS.JPG


    1. Enter Service Mode (press Additional Functions, 2 and 8 simultaneously, then
    Additional Functions).
    2. Enter Level 2 of Service Mode (press Additional Functions, then 2).
    3. Select Copier > Option > Body > UI-RSCAN.
    4. Set UI-RSCAN to 0 to remove the Scan tab. Set UI-RSCAN to 1 to display the
    Scan tab.
    5. Hit OK.
    Summary:
    UI-RSCAN = 0 will remove the scan button.
    UI-RSCAN = 1 will display the scan button
    Last edited by teckat; 08-20-2014 at 03:49 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Technician
    Join Date
    Aug 2014
    Posts
    10
    Rep Power
    20

    Re: Canon IR 5075 Legal Paper Cutting

    But sir the copier is not really use for networking its use normally for photocopying an so its jus that every time i scan legal paper through the ADF the document thgat prints always cuts. i dont really no much but im learning as much as possible is there a way i can jus set the tabs so it can appear or is it necessary for it to be network so that send tab can be accessed im sorry for putting u through all this trouble thanks for the help tho so hw can i fix this problem without networking this 5075 sir

  9. #9
    Field Supervisor 500+ Posts
    Join Date
    Sep 2011
    Posts
    849
    Rep Power
    37

    Re: Canon IR 5075 Legal Paper Cutting

    If you copy a LTR sized page it orientates properly? Are you originals curled? There's sensor flags (White spring loaded doodads) that determine what size original is being fed. If they are broken or whatnot it will throw off your margins and cause all sorts of weird shit.


    Edit: Have you run the feeder calibration? Service mode > Feeder > Function > tray* (all 4 must be done for it to click)

  10. #10
    Service Manager 10,000+ Posts
    Canon IR 5075 Legal Paper Cutting

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 5075 Legal Paper Cutting

    Quote Originally Posted by digenius48 View Post
    But sir the copier is not really use for networking its use normally for photocopying an so its jus that every time i scan legal paper through the ADF the document thgat prints always cuts. i dont really no much but im learning as much as possible is there a way i can jus set the tabs so it can appear or is it necessary for it to be network so that send tab can be accessed im sorry for putting u through all this trouble thanks for the help tho so hw can i fix this problem without networking this 5075 sir



    If u don,t have network & options & u use the printer a just a copy machine- u will not have. Scan option.

    U just use the DF as a feed>scan>print out


    U need to do a RDF-H1 tray width adjustment.
    Last edited by teckat; 08-20-2014 at 10:07 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here