iR5065 help required

**tee2520** · 08-21-2014

The output of my copier is like this photo spmetime. Please advice. Thank and best regards.

Sent from my iPhone using Tapatalk

**misserable old git** · 08-21-2014

looks like worn upper fixing roller... look for corresponding marks on the roller.

**Brian8506** · 08-21-2014

If it's only thru df, check small scanner glass. If it's prints and copies, check drum cleaning blade

**misserable old git** · 08-22-2014

the test print shows the marks going right to the edge of the page.... if it were something in picked up in doc feeder then there would be a gap where the lines meet the edge of the page.
it looks like those lines go right to the edge so I would still say UFR or marks on drum.

**Canuck** · 08-22-2014

Originally Posted by misserable old git

the test print shows the marks going right to the edge of the page.... if it were something in picked up in doc feeder then there would be a gap where the lines meet the edge of the page.
it looks like those lines go right to the edge so I would still say UFR or marks on drum.

I agree...ufr or drum blade