Dislikes:
0
-
-
-
Re: canon IR 3035 with only th power light on but does not cycle
Or main controller. Reseat all connectors on main first
-
Re: canon IR 3035 with only th power light on but does not cycle
ok just got some new info from the customer....
They have recently moved into this building & said the copier was working fine when they left for lunch and while they were gone the electrician that is doing lots of work for them installed a new outlet that was closer to the machine and he said the copier never worked once he unplugged it and then plugged it into the new outlet. I explained that it sounded like a power surge and the electrician came over (with an attitude) and plugged in a shop vac to demonstrate that the outlet was good. Im thinking it was not grounded properly and messed up the machine and then he realized it and rewired the outlet properly before the employees got back from lunch but the damage was already done.
-
Re: canon IR 3035 with only th power light on but does not cycle
That's a tough one, going to be impossible to prove, but I would say that's what happened!
However they might have unplugged the copier with out turning it off first, that can cause issues.
-
Re: canon IR 3035 with only th power light on but does not cycle
Get your meter out and check for dc voltages from power supply. If ok,try to boot in safe mode(turn off,hold down 2 and 8,turn on. ) Should say download mode on black screen. If not,might need a main controller.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks