-------------------------
J405 on Reader Controller PCB/is Connected to the copyboard open/close sensor.
make sure the Copy board cover is making contact with that LEVER of open/close
Make sure back left Copyboard Cover Hinge is not damaged (causes poor position to close on lever)
check the Copyboard
cover open/close sensor #1 (Rear: SR402)
Photo interrupter: Detects the copyboard cover open/ close status.
Starts detecting the original size when the copyboard cover angle is 30 deg.
Copyboard cover
open/close sensor #12 (SR403)
Finishes detecting the original size when the copyboard cover angle is 5 deg.
check that LEVER/
for copy cover open/close
sensors_open_close.JPG
Bookmarks