====================
in iRADVC
User Mode > Function Settings > Receive/Forward >Fax Settings
Select RX Mode
* Default Setting
Auto RX*, Fax/Tel Auto Switch
Fax/Tel Auto Switch
• Ring Start Time: 0 to 30 sec (8 sec
*)
• Ring Time: 15 to 300 sec (17 sec
*)
• F/T Switch Action: End, Receive
*
• Outgoing Message: On, Off
*
IN OTHER PRINTERS> Usually set this way------------------------------
The incoming ring count can be set by editing the Fax Service Mode accordingly:
1. Enter the general Service Mode, then Fax Service Mode, as required.
2. Select NCU (or #4B NCU).
3. Select ‘8. Auto
RX’.
4. Highlight or choose ‘007’.
The default setting will be 02.
5. Change the value as required.
Note: Setting the ring count to 4 or more rings may cause the transmitting device to time-out, if the connection time exceeds 30 - 35 seconds (T1 timer).
Bookmarks