hi friends
i have a machine ir 3235 with PS and DIRECT PRINT
how i can use it to print or scan to usb flash memory
pls help
hi friends
i have a machine ir 3235 with PS and DIRECT PRINT
how i can use it to print or scan to usb flash memory
pls help
=====================================
USB Print.pdf
To enable the machine to work with the USB memory stick perform the following steps:
1. Go into Additional Functions > System Settings.
2. Scroll down to screen 3 of 4 and press the USB settings button.
3. Set "Use USB Device" to On.
4. Set "Use USB Host" to On.
5. Set "Use MEAP Driver for USB Input Device" to Off.
6. Set "Use MEAP Driver for USB External Disk Device" to Off.
7. Power the machine off and back on.
Note: The above settings will not take effect until the machine is powered off and back on.
Verify that the USB option has been setup correctly by looking at the Mail Box tab. It should now say USB under the words Mail Box.
Print directly from a USB device to the imageRUNNER
You can print files of a maximum size of 2 GB. 1. Press [Mail Box].
2. Press [Memory Media].
3. Select the memory media → press [Open].
4. Select the document to print → press [Print].
5. To print a PDF, JPEG or TIFF file, select the paper size, press [Done].
6. Press [Start Print].
in order for this function to work, you will need the following items. Please pay attention to the notes for each item since requirements may be different for specific models.
Item Description Item Number See Notes Additional Memory Type A 512MB 2726B001AA 1 Direct Print Kit- F1 1542B004AA PCL Print Kit - AA1 2722B002AA 1 PS Print Kit- AA1 2729B002AA 1, 2, 3 USB Memory Connectivity Kit-A1 2729B001AA 4
Note 1: Standard on the 3245i/3235i models and optional on the 3245/3235/3230/3225 models.
Note 2: Requires the PCL Printer Kit-AA1.
Note 3: Requires the Additional Memory Type A (512MB RAM).
Note 4 : Requires the PS Printer Kit-AA1 or Direct Print Kit-F1 on the 3245/3235/3230/3225 models for the 'print from USB Memory Media' function.
================================================== ===================
*Manuals for iR3245/N, 3235/N, 3225/N
Reference Guide
http://www.google.com/url?sa=t&rct=j...74649129,d.cWc
Last edited by teckat; 09-08-2014 at 04:17 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
================================================== =======
u dont' see USB SETTINGS at all
This equipment contains the USB connector (host) on its control panel, which enables the functions below on the control panel.
- Saves scanned images and data saved in box in the USB memory
- Prints images saved in the USB memory. (The images saved in the USB memory cannot be transmitted or saved in box.)
- Connects the USB keyboard and inputs such information as mail address with the USB keyboard.
The USB connector (host) is equipped also on the main controller PCB, and similar functions can be executed on the left side of the product.
MEMO:
The conditions described below should be met when using the USB memory;
- The USB Memory Connectivity Kit-A1 (license) as an option is enabled.
- The following item; Additional Functions > System Settings > [USB Settings] > [USB Host] is set to 'ON'.
- The following item; Additional Functions > System Settings > [USB Settings] > [Use MEAP Driver for USB External Disk Device] is set to 'OFF'.
Relevant service mode:
- COPIER > OPTION > USER > USBH-DSP
Display switch for the following item; Additional Functions > System Settings > [USB Settings] > [USB Host]
<Settings>
0: Hide
1: Display (default)
- COPIER > OPTION > USER > USBH-DSP
Display switch for the following item; Additional Functions > System Settings > [USB Settings] > [Use MEAP Driver for USB External Disk Device]
<Settings>
0: Hide
1: Display (default)
- COPIER > OPTION > USER > USBI-DSP
Display switch for the following item; Additional Functions > System Settings > [USB Settings] > [Use MEAP Driver for USB Input Device]
<Settings>
0: Hide
1: Display (default)
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks