Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Apr 2014
    Posts
    36
    Rep Power
    21

    Error 061 - 001 canon ir5075

    Dear Friend....

    My canon IR 5075 has 061 - 001 error (I have this error two or three times on the on the other machine )

    Setting : OPTION ---> BODY ---> PO-CNT = 1 : The machine shows that error.
    Setting : OPTION --> BODY --> PO - CNT = 0 : the machine has no error at all. but the copy result has dark background so I tried to set the height of the primary charge and also the transfer charge to reduce the dark background print but it always has the half black background print.
    Some guy tell me that the laser is the problem.
    on my first machine I have bought new laser and fix the problem.
    but accidently this new problem get the same problem again: Error 061 - 001.

    please give me some advice, what 's the wrong ?
    What is the important thing to do when replace the laser?

    thank you.

  2. #2
    Service Manager 10,000+ Posts
    Error 061 - 001 canon ir5075

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Error 061 - 001 canon ir5075

    Make sure laser shutter is working properly and not stuck half way
    Laser Shutter is activated by the pin on the Primary Fan Duct Assembly
    The pin actuates the shutter through the opening in the Machine Front Plate
    Check the shutter operation and the pin on the Primary Fan Duct Assembly.
    If the pin is broken, it should be replaced. The pin can be replaced by replacing the Primary Fan 2 Duct.
    Duct, Primary Fan 2 FC6-3540-000.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Nov 2012
    Posts
    627
    Rep Power
    34

    Re: Error 061 - 001 canon ir5075

    E061-001: the drum surface potential (VL2) of the background is 200 V or higher

    Did you replace: drum? potential sensor?

  4. #4
    Technician
    Join Date
    Apr 2014
    Posts
    36
    Rep Power
    21

    Re: Error 061 - 001 canon ir5075

    Quote Originally Posted by teckat View Post
    Make sure laser shutter is working properly and not stuck half way
    Laser Shutter is activated by the pin on the Primary Fan Duct Assembly
    The pin actuates the shutter through the opening in the Machine Front Plate
    Check the shutter operation and the pin on the Primary Fan Duct Assembly.
    If the pin is broken, it should be replaced. The pin can be replaced by replacing the Primary Fan 2 Duct.
    Duct, Primary Fan 2 FC6-3540-000.

    I checked the laser unit but I don't know which part of it named laser shutter , please describe me.
    and also I don't know the pin of the Primary Fan Duct. thankyou

  5. #5
    Technician
    Join Date
    Apr 2014
    Posts
    36
    Rep Power
    21

    Re: Error 061 - 001 canon ir5075

    Quote Originally Posted by zelotprotos View Post
    I checked the laser unit but I don't know which part of it named laser shutter , please describe me.
    and also I don't know the pin of the Primary Fan Duct. thankyou
    Well, now it's working. the house of the screw driver is broken so I never apply the screw driver there.
    Thank you for giving me how that laser works.

    so, Can I just make a permanent lock on the Laser Shutter? such as give a tape or something to push it and never come back?

  6. #6
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: Error 061 - 001 canon ir5075

    Replace the rear cover of the fan duct assembly...or....melt a paper clip into the rear cover parallel to it at the broken area to make a small hoop to put a screw through. Works good in a pinch

  7. #7
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: Error 061 - 001 canon ir5075

    Quote Originally Posted by Canuck View Post
    Replace the rear cover of the fan duct assembly...or....melt a paper clip into the rear cover parallel to it at the broken area to make a small hoop to put a screw through. Works good in a pinch

    thats what i always do when the Fan base is broken
    Distinguished road makes you jewel in rough

  8. #8
    Trusted Tech 50+ Posts ARUN MISHRA's Avatar
    Join Date
    Nov 2010
    Location
    INDIA
    Posts
    77
    Rep Power
    28

    Re: Error 061 - 001 canon ir5075

    change primary corona assembly ..............

  9. #9
    Junior Member
    Join Date
    Jan 2017
    Location
    Banda Aceh
    Posts
    1
    Rep Power
    0

    Re: Error 061 - 001 canon ir5075

    clean or Replace Laser Unit, (Meybe Polygon Laser is damaged. You can see in there like a dirty polygon)

  10. #10
    Service Manager 10,000+ Posts
    Error 061 - 001 canon ir5075

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Error 061 - 001 canon ir5075

    Quote Originally Posted by Udai08 View Post
    clean or Replace Laser Unit, (Meybe Polygon Laser is damaged. You can see in there like a dirty polygon)


    Your are replying to a 2014 post.
    😱
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here