IR 3225N E0003-000

[mido]

Hi all,
Please I need your help about this error code E0003-000?????? the error display then the machine turn off automatically.
what's it mean????

thanks

[laitang]

It mean: The fixing temperature is too low after a standby state.

Replace the main thermistor.
Replace the DC controller PCB.

[teckat]

Hi all,
Please I need your help about this error code E0003-000?????? the error display then the machine turn off automatically.
what's it mean????

thanks

Remove fix unit_check for stuck paper\
Are u a tech_? if not_ call for service

U will need to clear error in service mode

Service Mode level 1 > Copier > Function > Clear > DC-CON
This is a must below----------
If possible run a P-PRINT before clearing the DC Controller to re-input the correct values. Copier > Function > MISC-P > P-PRINT

[mido]

Remove fix unit_check for stuck paper\
Are u a tech_? if not_ call for service

U will need to clear error in service mode

Service Mode level 1 > Copier > Function > Clear > DC-CON
This is a must below----------
If possible run a P-PRINT before clearing the DC Controller to re-input the correct values. Copier > Function > MISC-P > P-PRINT

Hi,
Yes I'm a tech. the error cleared by clear error under funtion > clear > error

thank you

[teckat]

Hi,
Yes I'm a tech. the error cleared by clear error under funtion > clear > error

thank you

------------------------------

good> now check your outlet for proper voltage & proper ground

HOT>GROUND
HOT>NEUTRAL
NEUTRAL>GROUND= this should be between 0.0v>0.5v

[ARUN MISHRA]

paper stuk in upper fixing roller

[jrgf67]

Saludos. Comprueba el calentador de la fijación. Posiblemente tenga un papel enrollado en ella que impide alcanzar la temperatura y si no tiene nada cambia el calentador.

Greetings. Check the fixing heater. Possibly have a paper wrapped around it that prevents temperature is reached and if you have nothing changes the heater.