Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10

Thread: CANON MF3010

  1. #1
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Question CANON MF3010

    Hello everyone it's my first thread ..l have problems ...canon mf3010 ..if l started this mf it have this code falshing E3...0...1 and the signal of jammed was flash too ..and any copy function there please any idea ...
    BEST TECHNICIAN . NICE PEOPLE .

  2. #2
    Service Manager 10,000+ Posts
    CANON MF3010

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: CANON MF3010

    Quote Originally Posted by zaza View Post
    Hello everyone it's my first thread ..l have problems ...canon mf3010 ..if l started this mf it have this code falshing E3...0...1 and the signal of jammed was flash too ..and any copy function there please any idea ...
    -------------------------

    E301

    Insufficient light intensity at shading When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies.
    (1) Check the connection between the Main Controller PCB and the CIS Unit. (J2)
    (2) Replace CIS Unit.
    (3) Replace the Main Controller PCB.


    If the [ ] indicator is blinking, a paper jam occurs inside the printer. Follow the procedures in this section to remove the jammed paper.


    WARNING
    When removing the jammed paper

    • Use caution to avoid cutting your hands.


    When removing jammed paper or when inspecting the inside of the machine

    • Do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical shock.




    ATTENTION
    If loose toner comes into contact with your skin or clothing

    • Wash with cold water only. Avoid warm water, as this will set the toner and cause it to stain your skin or clothing.


    When removing the jammed paper

    • Remove the paper carefully so that no paper fragments remain inside the machine. Also, do not put your hands in areas other than those described in the procedure. Doing so may result in injury or burns.


    Do not touch the fixing unit (A).

    • Touching the fixing unit (A) may cause burns as it becomes very hot during use.





    IMPORTANT
    If the jammed paper is torn

    • Remove all torn pieces of paper to avoid further jams.


    If paper jams occur repeatedly

    • Check the following.


    - Fan the paper stack and tap the edge on a flat surface to align the paper before loading it into the machine.
    - Make sure that the paper you are using meets the requirements for use.
    [ Paper Handling ]
    - Make sure that you have removed all scraps of paper from the inside of the machine.
    Do not touch the transfer roller (A).

    • Touching the transfer roller (A) may damage the machine.





    NOTE
    Do not force the jammed paper out of the machine.

    • Contact your local authorized Canon dealer or the Canon help line for assistance, if needed.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Thumbs up Re: CANON MF3010

    Quote Originally Posted by teckat View Post
    -------------------------

    E301

    Insufficient light intensity at shading When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies.
    (1) Check the connection between the Main Controller PCB and the CIS Unit. (J2)
    (2) Replace CIS Unit.
    (3) Replace the Main Controller PCB.


    If the [ ] indicator is blinking, a paper jam occurs inside the printer. Follow the procedures in this section to remove the jammed paper.


    WARNING
    When removing the jammed paper

    • Use caution to avoid cutting your hands.


    When removing jammed paper or when inspecting the inside of the machine

    • Do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical shock.




    ATTENTION
    If loose toner comes into contact with your skin or clothing

    • Wash with cold water only. Avoid warm water, as this will set the toner and cause it to stain your skin or clothing.


    When removing the jammed paper

    • Remove the paper carefully so that no paper fragments remain inside the machine. Also, do not put your hands in areas other than those described in the procedure. Doing so may result in injury or burns.


    Do not touch the fixing unit (A).

    • Touching the fixing unit (A) may cause burns as it becomes very hot during use.





    IMPORTANT
    If the jammed paper is torn

    • Remove all torn pieces of paper to avoid further jams.


    If paper jams occur repeatedly

    • Check the following.


    - Fan the paper stack and tap the edge on a flat surface to align the paper before loading it into the machine.
    - Make sure that the paper you are using meets the requirements for use.
    [ Paper Handling ]
    - Make sure that you have removed all scraps of paper from the inside of the machine.
    Do not touch the transfer roller (A).

    • Touching the transfer roller (A) may damage the machine.





    NOTE
    Do not force the jammed paper out of the machine.

    • Contact your local authorized Canon dealer or the Canon help line for assistance, if needed.
    friend takat l change the pcb by another but still problems ..please if you have sm l want it ...
    BEST TECHNICIAN . NICE PEOPLE .

  4. #4
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Re: CANON MF3010

    other something ..it have any paper insider ....and l was change the pcb by another but it have any news ..tell me it have any software to solve my problems
    BEST TECHNICIAN . NICE PEOPLE .

  5. #5
    Service Manager 10,000+ Posts
    CANON MF3010

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: CANON MF3010

    Quote Originally Posted by zaza View Post
    other something ..it have any paper insider ....and l was change the pcb by another but it have any news ..tell me it have any software to solve my problems
    ------------------;-\
    What about the CIS UNIT _?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Re: CANON MF3010

    Quote Originally Posted by teckat View Post
    ------------------;-\
    What about the CIS UNIT _?
    please l don't know this parts ..CIS?
    BEST TECHNICIAN . NICE PEOPLE .

  7. #7
    Service Manager 10,000+ Posts
    CANON MF3010

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: CANON MF3010

    Quote Originally Posted by zaza View Post
    please l don't know this parts ..CIS?
    --------;*
    Contact Image Sensor
    Error 301 =Insufficient light intensity at shading

    Although the ImageClass model provides monochrome prints, it can scan color documents easily. In fact, this multifunctional printer allows seamless scanning as it has a color contact image sensor (CIS). The sensor can scan documents with an interpolated resolution of up to 9600 dpi. The optical resolution is 600×600 dpi. Four file formats can be saved, such as Jpeg, Tiff, PDF, and BMP. The speed for scanning is at 8 seconds per sheet. However, the speed is quite high at 3 seconds per sheet for grayscale scanning.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Re: CANON MF3010

    Quote Originally Posted by teckat View Post
    --------;*
    Contact Image Sensor
    Error 301 =Insufficient light intensity at shading

    Although the ImageClass model provides monochrome prints, it can scan color documents easily. In fact, this multifunctional printer allows seamless scanning as it has a color contact image sensor (CIS). The sensor can scan documents with an interpolated resolution of up to 9600 dpi. The optical resolution is 600×600 dpi. Four file formats can be saved, such as Jpeg, Tiff, PDF, and BMP. The speed for scanning is at 8 seconds per sheet. However, the speed is quite high at 3 seconds per sheet for grayscale scanning.
    well you means my problems in scanner section ?
    BEST TECHNICIAN . NICE PEOPLE .

  9. #9
    Service Manager 10,000+ Posts
    CANON MF3010

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: CANON MF3010

    Quote Originally Posted by zaza View Post
    well you means my problems in scanner section ?


    --------------------------------------------------------------------------


    i guess so, did u see the description of error


    time to get down & investigate = search or examine into the particulars in an attempt to learn the facts about something hidden, unique, or complex--
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Thumbs up Re: CANON MF3010

    yes but l want her sm urgntly ..it have any chance .
    BEST TECHNICIAN . NICE PEOPLE .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here