Thanks:
0
Likes:
0
Dislikes:
0
-
Canon Ir 3570
My canon was jamming previously and i bought a new fuser unit but when i placed it in the machine it still jams but when i remove the fuser and out it in different machine it works fine please help
the jam code is 0108
-
Re: Canon Ir 3570
Might try removing the pads for the flapper on the right door. If they are sticking it will cause it to jam at the fuser.
FC5-1354-000 1 FLAPPER, FIXING DELIVERY REV.
-
Trusted Tech
50+ Posts
- Rep Power
- 28
Re: Canon Ir 3570
change paper output delivery no1 to delivery no2 ,,or ,,no3 outside ....if paper deliver fine .....check no1 delivery flapper,flapper drive solenoid,flapper pad,,,and try A4R type feed
ARUN KUMAR MISHRA
-
Re: Canon Ir 3570
check also vertical path rollers, grey ones instead of black ones...and have you the modified doors?
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: Canon Ir 3570
My IR 3045 Do the same
After 1-2 Pages, the Paper stops in the middle of the fixing unit. when i removed the paper it is folded like an accordion.
I tried all 4 trays and did the same thing
Paper Orientation: Portait
I did notice that when i place the paper in Landscape it works much better but will jam after couple of copies and some of the copies have fold in the middle. so it goes out of the machine shorter than other copies.
Error: 1017, 0202, 0102, 0201
All sensors checked, - not sticking
right door flapper check
Fixing unit rolls fine
Paper: SUB20/70gsm
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks