I have Canon IR 3300 was running well before but now after
I turn it on it show up with red blinking signal on the screen
where the fuser unit is and the machine start with out any
noise, please any one out there help me with this matter, Thanks
I have Canon IR 3300 was running well before but now after
I turn it on it show up with red blinking signal on the screen
where the fuser unit is and the machine start with out any
noise, please any one out there help me with this matter, Thanks
what display say .......error or jam
ARUN KUMAR MISHRA
Nothing but red blinking light show up pointing to
where fuser assembly place and show open front
panel and left side panel which is I did few times
and still have the same problem.
There is no red blinking light near the fuser on this model.
Can you take a picture of the machine including the screen?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
take a photo of the display and post
ARUN KUMAR MISHRA
you mite have a lazy sensor in the fixing assy, had them stick so showing a constant jam at startup
please take a photo for " what errow showed in the machine" when problem,
to see and understand more clearly.
copier part supplier
Bookmarks