MF4140

[akm]

Dear/ CopyTechTeam


Please i want your help to solve the error e225 appears in the screen of MF4140


thanks
akm

[ernesto]

Dear/ CopyTechTeam


Please i want your help to solve the error e225 appears in the screen of MF4140


thanks
akm

Hi,
May be the lamp is a fault......

All the best

[akm]

Hi,
May be the lamp is a fault......

All the best

I changed the CIS but the error still appears

[teckat]

I changed the CIS but the error still appears

could have a damaged cable or connector

[akm]

could have a damaged cable or connector

I checked the flat cable and connectors , they are working

[Blizzoo]

I checked the flat cable and connectors , they are working

Yes,they may be fine when metered but when flex cable bent sometimes fail to conduct.

Take a good clean to white refference underneath glass and test.
Had once a bad CIS motor leading to this error.

[teckat]

I checked the flat cable and connectors , they are working

U could also have a voltage supply issue or improper ground V from outlet

[ncbabak]

Dear/ CopyTechTeam


Please i want your help to solve the error e225 appears in the screen of MF4140


thanks
akm

Hi , If you changed the CIS and cable but the error still appears,You must Use FirmwareUpdateTool .

[copier tech]

I had this before, theres a CIS setup you need to run in service mode, you don't need to replace the CIS, check the service manual